Publications
Enrico FILIPPI
Accéder au dépôt institutionnel
Nombre de publications : 154
    2021
    Périodiques scientifiques/Article
    • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. "International Journal of Material Forming, 4" (3), 361 - 374. doi:10.1007/s12289-020-01535-2
    Top
    2019
    Périodiques scientifiques/Article
    • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112609
    • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. "European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019", 76-77.
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). "Performance simulation of different toolpaths in 2D1/2 pocket milling". Paper presented at 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Roland, F., Filippi, E., Moeyaert, V., & Bette, S. (2019). "Fab-IoT-Lab: Technological Expertise Guidance and Prototyping Skills in a Single Place". Paper presented at World Forum on Internet of Things, Limerick, Ireland.
    Colloques et congrès scientifiques/Communication poster
    • Demarbaix, A., Dehombreux, P., & Filippi, E. (15 March 2019). "FabLab Mons: Un outil pédagogique". Poster session presented at 3ème Journée des Enseignants de l'UMONS, Mons, Belgium.
    • Roland, F., Debauche, O., Filippi, E., & Bette, S. (05 March 2019). "Geolocation of Tools on Construction Sites and LoRa Performance". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    • Demarbaix, A., Dehombreux, P., & Filippi, E. (05 March 2019). "FabLab Mons: Un outil à la recherche". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    Allocutions et communications diverses/Article grand public
    • Demarbaix, A., & Filippi, E. (2019). Au pays des 'fablabs': A Mons, on veut susciter l'intérêt pour l'Internet des objets. "Journal la Libre".
    Allocutions et communications diverses/Autre
    • Roland, F., Filippi, E., & Bette, S. (2019). "Pecha Kucha Night IoT : Fab-IoT-Lab".
    Top
    2018
    Périodiques scientifiques/Article
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. "Journal of Manufacturing Processes, 32", 85-92. doi:10.1016/j.jmapro.2018.01.020
    Colloques et congrès scientifiques/Communication poster
    • Roland, F., Bette, S., & Filippi, E. (03 July 2018). "Fab-IoT-Lab: a Fab-IoT-Lab to support IoT projects of industries and entrepreneurs". Poster session presented at Journée IIoT, Strasbourg, France.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). "Hybrid machining of Ceramic: Combination sequential milling and laser machining". Poster session presented at The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
    Mémoires et thèses/Thèse de doctorat
    • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). "Functionalization of Electron BeamMelting parts in order to guide finishing operations". Unpublished doctoral thesis, Université de Mons. Jury: Rivière, E. (Promotor), Filippi, E. (Promotor), Descamps, T., Ducobu, F., Guilhem, M., Godet, S., Rivière, E., Pedro, A., Filippi, E., ... Simar, A.
    Top
    2017
    Périodiques scientifiques/Article
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. "AIP Conference Proceedings, 1896". doi:10.1063/1.5008036
    • Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. "Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017", 226-234.
    • Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. "Procedia CIRP, 58", 245-250. doi:10.1016/j.procir.2017.03.188
    • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. "Procedia CIRP, 58", 239-244. doi:10.1016/j.procir.2017.03.187
    • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. "European Journal of Mechanics. A, Solids, 65", 324-335. doi:10.1016/j.euromechsol.2017.05.007
    • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. "Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017", 111-112.
    • Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. "Finite Elements in Analysis and Design, 134", 27-40. doi:10.1016/j.finel.2017.05.010
    • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. "Meccanica, 52", 1577-1592. doi:10.1007/s11012-016-0499-7
    • Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. "International Journal of Mechanical Sciences, 122", 143-155. doi:10.1016/j.ijmecsci.2017.01.004
    • Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. "Meccanica, 52" (1-2), 35-44. doi:s11012-016-0398-y
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). "REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL". Paper presented at XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.
    • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). "Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters". Paper presented at workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
    • Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs". Paper presented at 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.
    • Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). "The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation". Paper presented at 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). "Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters". Paper presented at 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size". Poster session presented at The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
    • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs". Poster session presented at The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). "The Hybrid Machining of Ceramic The choice of production stage". Poster session presented at euspen's 17th International Conference & Exhibition, Hanovre, Germany.
    • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). "Influence of process parameters on surface roughness of EBM". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "The Hybrid Machining of Ceramic: The choice of production stage". Poster session presented at 8e édition montoise du MdC2017, Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size". Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium.
    • Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). "Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    • Wattiaux, D., Verlinden, O., & Filippi, E. (07 March 2017). "Utilisation du Prototypage virtuel et rapide dans le cadre du cours de Mécanique Rationnelle" [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.
    Top
    2016
    Périodiques scientifiques/Article
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. "AIP Conference Proceedings, 1769". doi:10.1063/1.4963616
    • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. "European Journal of Mechanics. A, Solids, 59", 58-66. doi:10.1016/j.euromechsol.2016.03.008
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. "Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing".
    • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. "Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016".
    • Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. "International Journal of Mechanical Sciences, 107", 136-149. doi:10.1016/j.ijmecsci.2016.01.008
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. "International Journal of Rapid Manufacturing, 5" (3/4).
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). "Study of the functionalization of electron beam melting part through machining". Paper presented at 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). "Characterization of electron beam melting process (EBM) : Capability approach". Paper presented at ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.
    • Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots". Paper presented at MUGV 2016, Tours, France.
    • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). "Functionalization of Electron beam melting parts by Machining". Paper presented at workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.
    • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). "Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining". Paper presented at 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Leroy, C., Rivière, E., & Filippi, E. (2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots". Paper presented at MUGV 2016, Tours, France.
    • Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). "Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche". Paper presented at MUGV 2016, Tours, France.
    Colloques et congrès scientifiques/Communication poster
    • Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). "Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "CEL Modelling of Ti6Al4V Orthogonal Cutting". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). "Development of the hybrid sequential machining: Laser machining and milling". Poster session presented at 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
    • Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). "Study of the functionalization of electron beam melting part through machining". Poster session presented at Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). "Concept of the hybrid machining: the laser machining and milling". Poster session presented at Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.
    Allocutions et communications diverses/Autre
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser".
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière".
    Top
    2015
    Périodiques scientifiques/Article
    • Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. "International Journal of Material Forming, 8" (3), 455-468. doi:10.1007/s12289-014-1189-4
    • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. "Procedia CIRP, 31", 124-129. doi:10.1016/j.procir.2015.03.056
    • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. "Key Engineering Materials, 651-653", 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116
    • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. "Key Engineering Materials, 651-653", 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197
    • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. "Simulation Modelling Practice and Theory, 53", 1-14. doi:10.1016/j.simpat.2015.02.003
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). "L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage". Paper presented at A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.
    • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). "Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining". Paper presented at 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.
    • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). "Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling". Paper presented at Esaform 2015, Graz, Austria.
    • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). "Uncertainty management of cutting forces parameters and its effects on machining stability". Paper presented at 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.
    Colloques et congrès scientifiques/Communication poster
    • Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). "Metrological analysis of electron beam melting process (EBM)". Poster session presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). "A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting". Poster session presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). "LAMAC: Usinage laser sur de la céramique « crue »". Poster session presented at The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). "Characterization of electron beam melting process (EBM) in order to enhance finishing operations". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    • Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). "Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). "A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting". Poster session presented at Matinée des chercheurs (MDC2015), Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). "Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    Allocutions et communications diverses/Autre
    • Filippi, E., & Lesage, A. (2015). "Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévision RTL-TVI".
    • Filippi, E., & Lesage, A. (2015). "Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévisé de la RTBF".
    • Filippi, E., Verlinden, O., & Chariot, C. (2015). "'Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévision RTBF".
    • Filippi, E., Verlinden, O., & Chariot, C. (2015). "Eurobot 2015: Robomovies - Ultime répétition des robots, RTBF Info Régions".
    • Filippi, E., Verlinden, O., & Chariot, C. (2015). "Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévisé TéléMB'".
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). "Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté".
    Top
    2014
    Périodiques scientifiques/Article
    • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. "International Journal of Mechanical Sciences, 81", 77-87. doi:10.1016/j.ijmecsci.2014.02.017
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche". Paper presented at MUGV 2014, Clermont-Ferrand, France.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Leroy, C., Rivière, E., & Filippi, E. (2014). "TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE". Paper presented at MUGV 2014, Clermont-Ferrand, France.
    • Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. "Proceedings of the eleventh international conference on high speed machining (HSM 2014)".
    • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). "TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE". Paper presented at Eleventh International Conference on High Speed Machining, Prague, Czechia.
    Colloques et congrès scientifiques/Communication poster
    • Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). "Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model". Poster session presented at 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Modèle thermique par éléments finis de différentes trajectoires en usinage laser". Poster session presented at 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine". Poster session presented at 1st Research Day of the Materials Research Institute, Mons, Belgium.
    • Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche". Poster session presented at Journée des chercheurs de l'Institut Matériaux, Mons, Belgium.
    Mémoires et thèses/Thèse de doctorat
    • Kinet, D. (2014). "Utilisation de capteurs à réseaux de Bragg fibrés pour le suivi de matériaux composites pendant et après la fabrication" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/818
    Documents pédagogiques/Notes de cours et syllabus
    • Rivière, E., Filippi, E., & Dehombreux, P. (2014). "Construction des machines et procédés de fabrication : Notes de cours".
    Top
    2013
    Périodiques scientifiques/Article
    • Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. "Journal of Mechanics Engineering and Automation, 3", 441-448.
    • Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. "Procedia CIRP, 8", 378-383. doi:10.1016/j.procir.2013.06.120
    • Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. "Key Engineering Materials, 554-557", 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). "Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V". Paper presented at CIRP Conference on Modeling of Machining Operations, Turin, Italy.
    • Rivière, E., & Filippi, E. (18 April 2013). "Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation". Paper presented at Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). "Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique". Paper presented at Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). "A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V". Paper presented at SIMULIA Academic Seminar 2013, Mons, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Chariot, C., Filippi, E., & Verlinden, O. (2013). "CPG tuning using sensory feedback for walking applications". Paper presented at ECCOMAS Multibody Dynamics 2013, Zagreb, Croatia.
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting" [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany.
    • Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). "Finition des pièces mécaniques à la sortie d'une production additive". Poster session presented at 7ème édition de la Matinée de Chercheurs, Mons, Belgium.
    • Chariot, C., Filippi, E., & Verlinden, O. (12 March 2013). "Mutlibody Simulation of Modular Robots with EasyDyn: Gait Tuning using sensory Feedback". Poster session presented at Matinée des chercheurs, Mons, Belgium.
    • Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). "Optimisation de l'usinage de cavités par fraisage" [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting". Poster session presented at Matinée des Chercheurs 2013, Mons, Belgium.
    Mémoires et thèses/Thèse de doctorat
    • Ducobu, F. (2013). "Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique". Unpublished doctoral thesis, Université de Mons. Jury: Filippi, E. (Promotor), Rivière, E. (Promotor), Datoussaïd, S., D'Acunto, A., Massart, T. J., Pantalé, O., Ponthot, J.-P., ... Stas, A.
    Top
    2012
    Périodiques scientifiques/Article
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). "Chip Formation in Microcutting". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    • Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). "Dynamic simulation of the micro-milling process including minimum chip thickness". Paper presented at 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Ducobu, F., Rivière, E., & Filippi, E. (2012). "Chip Formation in Micro-cutting". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    • Chariot, C., Filippi, E., & Verlinden, O. (2012). "Simulation framework of modular robots using EasyDyn". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    Top
    2011
    Périodiques scientifiques/Article
    • Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. "Advanced Materials Research, 223", 3-11. doi:10.4028/www.scientific.net/AMR.223.3
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). "A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V". Paper presented at CIRP conference on modelling of machining operations, Sintra, Portugal.
    • Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). "Experimental study of parameter-dependent analytical cutting force model". Paper presented at Matinée des chercheurs, UMONS, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). "Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis". Poster session presented at 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
    • Chariot, C., Filippi, E., & Verlinden, O. (22 March 2011). "Locomotion Simulation of Self-Reconfigurable Robots". Poster session presented at Matinée des Chercheurs, UMons, Belgium.
    Top
    2010
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting". Paper presented at Eighth International Conference on High Speed Machining, Metz, France.
    • Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). "Orthogonal Cutting Simulations with Abaqus/Explicit - Current results". Paper presented at Simulia Academic Seminar 2010, Leuven, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Ducobu, F., Rivière, E., & Filippi, E. (2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting". Paper presented at Eighth International Conference on High Speed Machining, Metz, France.
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). "Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis". Poster session presented at Matinée des Chercheurs, Bruxelles, Belgium.
    Top
    2009
    Parties d’ouvrages/Contribution à des ouvrages collectifs
    Périodiques scientifiques/Article
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale". Paper presented at 19ème Congrès Français de Mécanique, Marseille, France.
    • Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). "Investigations on chip formation in micro-milling". Paper presented at International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.
    • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation in Micromilling". Paper presented at 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale". Paper presented at Congrès Français de mécanique, Marseille, France.
    • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip formation in micro-milling". Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
    • Chariot, C., Filippi, E., & Verlinden, O. (2009). "The interest of CPG's for locomotion control of self-reconfigurable robots". Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
    • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Paper presented at CIRP conference on modelling of machining operations, San Sebastian, Spain.
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Poster session presented at 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.
    • Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). "Identification de modèles d'efforts de coupe en fraisage". Poster session presented at Lab' insight, Louvain-la-Neuve, Belgium.
    • Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
    • Chariot, C., Filippi, E., & Verlinden, O. (17 March 2009). "The interest of CPG's for locomotion control of self-reconfigurable robots". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
    Top
    2008
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). "Phénomènes de coupe en micro-fraisage par enlèvement de copeaux". Paper presented at Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    Colloques et congrès scientifiques/Communication poster
    • Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). "Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux". Poster session presented at Matinée des Chercheurs 2008, Bruxelles, Belgium.
    Top
    2007
    Périodiques scientifiques/Article
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    Colloques et congrès scientifiques/Communication poster
    • Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). "Etude et simulation des procédés d'usinage à grande vitesse". Poster session presented at Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.
    Mémoires et thèses/Thèse de doctorat
    • Descamps, F. (2007). "Etude du comportement des roches poreuses saturées aux conditions de grande profondeur : Mise au point d'un système de compression triaxiale intégrant les effets de la pression de pore et de la température". Unpublished doctoral thesis, Université de Mons. Jury: Tshibangu, K. (Promotor), Rémy, M., Schroeder, C., Datoussaïd, S., Thimus, J.-F., Filippi, E., Longuemare, P., ... Onaisi, A.
    • Rivière, E. (2007). "Etude et simulation de procédés de fraisage grande vitesse : stabilité, efforts de coupe, états de surface". Unpublished doctoral thesis, Université de Mons. Jury: Filippi, E. (Promotor), Dehombreux, P. (Promotor), Verlinden, O., Conti, C., Stas, A., de Meester, B., Lybaert, P., Delchambre, A., Van Herck, P., ... Debongnie, J.-F.
    Top
    2006
    Colloques et congrès scientifiques/Communication orale non publiée/Abstract
    • Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). "Forces, vibrations and roughness prediction in milling using dynamic simulation". Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
    • Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). "Chatter detection using a microphone". Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    Top
    1996
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Kenda, R., Conti, C., Wu, Y., & Filippi, E. (1996). "Updating methods applied to spatial electronic equipments". Paper presented at International Conference on Noise and Vibration Engineering, Leuven, Belgium.
    • Kenda, R., Conti, C., Wu, Y., & Filippi, E. (1996). "Updating methods applied to spatial electronic structures". Paper presented at Conference on Spacecraft Structures, Materials and Mechanical Testing, Noordwijck, Netherlands.
    Top
    1995
    Colloques et congrès scientifiques/Communication publiée dans un périodique
    • Conti, C., Lybaert, P., & Filippi, E. (1995). "Prise en compte de contraintes d'environnement d'ordre thermique et vibratoire sur la conception de matériel électronique embarqué". Paper presented at Congrès Sciences et Technologies d'environnement, Leuven, Belgium.
    • Kenda, R., Wu, Y., Conti, C., & Filippi, E. (1995). "Updating methods applied to electronic structures". Paper presented at International Congress MV2 on the New Advances in Modal Synthesis of Large Structures, Lyon, France.
    Top