Publications
Edouard RIVIERE LORPHEVRE
Accéder au dépôt institutionnel
Nombre de publications : 280
2025
Périodiques scientifiques/Article
  • DAMBLY, V., Olivier, B., Rivière, E., Ducobu, F., & Verlinden, O. (August 2025). Iterative offline trajectory correction based on dynamic model for compensating robot-dependent errors in robotic machining. "Robotics and Computer-Integrated Manufacturing, 94", 102960. doi:10.1016/j.rcim.2025.102960
Top
2024
Périodiques scientifiques/Article
  • Leroy, C., Lavernhe, S., & Rivière, E. (24 August 2024). Hermite Quartic Splines for Smoothing and Sampling a Roughing Curvilinear Spiral Toolpath. "Applied Sciences, 14" (17), 7492. doi:10.3390/app14177492
  • Homrani, M. K., Volcher, S., RIVIERE LORPHEVRE, E., Demarbaix, A., ODENT, J., LORENZONI, M., SPITAELS, L., & Ducobu, F. (08 August 2024). Investigation into Influence of Tensile Properties When Varying Print Settings of 3D-Printed Polylactic Acid Parts: Numerical Model and Validation. "Polymers, 16" (16), 2253. doi:10.3390/polym16162253
  • None
  • SPITAELS, L., Nieto Fuentes, E., DAMBLY, V., Rivière, E., Arrazola, P.-J., & DUCOBU, F. (16 May 2024). Faster Evaluation of Dimensional Machine Performance in Additive Manufacturing by Using COMPAQT Parts. "Journal of Manufacturing and Materials Processing, 8" (3), 100. doi:10.3390/jmmp8030100
  • Spitaels, L., Aldeiturriaga Olabarri, N., Bossu, J., Martic, G., Juste, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (2024). Experimental evaluation of the maximal force before debonding a part from the build platform of an AM printer. "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-10
  • Bossu, J., Rivière, E., Spitaels, L., Ducobu, F., Delaunois, F., Martic, G., Delmotte, C., Juste, E., & Petit, F. (2024). Green machining of Ti6Al4V/Polymers composite made by pellets additive manufacturing. "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-210
  • Lorenzoni, M., Odent, J., Rivière, E., Spitaels, L., Homrani, M. K., & Ducobu, F. (2024). Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM). "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-11
  • Nutte, M., Rivière, E., Dambly, V., Arrazola, P.-J., Lazoglu, I., & Ducobu, F. (2024). Numerical simulation of milling operations on flexible composite parts. "Materials Research Proceedings". doi:10.21741/9781644903131-225
  • Homrani, M. K., Demarbaix, A., Rivière, E., Beuscart, T., Ochna, I., & Ducobu, F. (2024). Comparison between ALE and Lagrangian finite element formulations to simulate tensile loading for FDM parts. "Materials Research Proceedings".
  • Ducobu, F., Kugalur-Palanisamy, N., Briffoteaux, G., Gobert, M., Tuyttens, D., Arrazola, P.-J., & Rivière, E. (16 April 2024). Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining—Application to Arbitrary Lagrangian Eulerian Orthogonal Cutting of Ti6Al4V. "Journal of Manufacturing Science and Engineering, 146" (6). doi:10.1115/1.4065223
  • Spitaels, L., Nieto Fuentes, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (February 2024). A Systematic Method for Assessing the Machine Performance of Material Extrusion Printers. "Journal of Manufacturing and Materials Processing, 8" (1), 36. doi:10.3390/jmmp8010036
  • None
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Lorenzoni, M., Odent, J., Rivière, E., Spitaels, L., Homrani, M. K., & Ducobu, F. (25 April 2024). "Preliminary study on the impact of thermal processing on the performances of parts obtained by Fused Deposition Modeling (FDM)" [Paper presentation]. 27th International ESAFORM Conference on Material Forming (ESAFORM 2024), Toulouse, France.
  • Nutte, M., Rivière, E., Dambly, V., ARRAZOLA, P.-J., LAZOGLU, I., & Ducobu, F. (25 April 2024). "Numerical simulation of milling operations on flexible composite parts" [Paper presentation]. 27th International ESAFORM Conference on Material Forming (ESAFORM 2024), Toulouse, France.
Colloques et congrès scientifiques/Communication poster
  • Nutte, M., Rivière, E., Dambly, V., & Ducobu, F. (26 March 2024). "Simulation semi-statique pour le fraisage de plaques flexibles en FRP" [Poster presentation]. Tuesday of Researchers "Mardi des Chercheurs" 2024, Mons, Belgium.
  • Lorenzoni, M., Odent, J., Rivière, E., Spitaels, L., Homrani, M. K., & Ducobu, F. (26 March 2024). "Impact of thermal processing on the performances of parts obtained by Fused Deposition Modeling (FDM)" [Poster presentation]. Tuesday of Researchers/Mardi des chercheurs, Mons, Belgium.
  • Delooz, F., Olivier, B., Rivière, E., & Dambly, V. (26 March 2024). "Robotic machining and applications: Energy-optimised trajectories planning for 6-axis industrial robot" [Poster presentation]. Mardi des Chercheurs (MdC), Mons, Belgium.
  • Spitaels, L., Rivière, E., Bossu, J., Dambly, V., & Ducobu, F. (2024). "Toward More Flexible and Personalized Production of Ceramic Parts" [Poster presentation]. Tuesday of Researchers "Mardi des Chercheurs" 2024, Mons, Belgium.
Mémoires et thèses/Thèse de doctorat
  • Spitaels, L. (2024). "Enabling the Hybrid Manufacturing of Ceramic Parts by Additive Manufacturing and Milling" [Doctoral thesis, UMONS - Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/50403
Conférences scientifiques dans des universités ou centres de recherche/Conférence scientifique dans des universités ou centres de recherche
  • Bossu, J., Rivière, E., Spitaels, L., Delaunois, F., Ducobu, F., Delmotte Cathy, & Martic Grégory. (20 March 2024). "Composite Ti-6Al-4V/Polymers Pellets Additive Manufacturing: improvement of the printing parameters to obtain dense and defectless part" [Paper presentation]. Metal AMS, Senlis, France.
Top
2023
Périodiques scientifiques/Article
  • Ducobu, F., Demarbaix, A., Rivière, E., Spitaels, L., Petit, F., Preux, N., Duterte, C., Mulliez, M., & Lauwers, B. (20 June 2023). Impact of Green Ceramic Hybrid Machining (GCHM) on Reliability and Repeatability of the Properties of Sintered Yttrium-Tetragonal Zirconia Polycrystal Parts. "Journal of Manufacturing and Materials Processing, 7" (3), 118. doi:10.3390/jmmp7030118
  • None
  • Spitaels, L., Rivière, E., Gregory Martic, Enrique Juste, & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography. "Materials Research Proceedings, 28", 1245-1253. doi:10.21741/9781644902479-135
  • None
  • Spitaels, L., Dantinne, H., Bossu, J., Rivière, E., & Ducobu, F. (10 March 2023). A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. "Journal of Composites Science, 7" (3), 112. doi:10.3390/jcs7030112
  • None
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Fabrice Petit, Cathy Delmotte, Grégory Martic, Enrique Juste, Spitaels, L., Rivière, E., Ducobu, F., Bossu, J., & Delaunois, F. (29 September 2023). "Evaluation of the suitability of Pellet Additive Manufacturing technology for the design & manufacturing of complex ceramic parts" [Paper presentation]. IWAC (INTERNATIONAL WORKSHOP ON ADVANCED CERAMICS, IWAC09), Limoges, France.
  • Ducobu, F., Spitaels, L., Martic, G., Juste, E., & Rivière, E. (25 August 2023). "Hybrid manufacturing of components made of engineering ceramics" [Paper presentation]. 72nd CIRP General Assembly - STC-C meeting.
  • Ducobu, F., Kugalur Palanisamy, N., Arrazola, P.-J., & Rivière, E. (01 June 2023). "Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model" [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
  • Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (01 June 2023). "Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing" [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
  • Spitaels, L., Rivière, E., Martic, G., Juste, E., & Ducobu, F. (19 April 2023). "Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography" [Paper presentation]. 26th International ESAFORM Conference on Material Forming, ESAFORM 2023.
Colloques et congrès scientifiques/Communication publiée dans un périodique
Rapports/Autre
  • Dehombreux, P., Rivière, E., Equeter, L., Verlinden, O., & Olivier, B. (2023). "Time2Go4.0 - Collaborative Projects for Top Indstrial Managers in Sustainable Industry 4.0 - How to ensure quality of preparation and execution of collaborative blended design projects including 4.0 and sustainability aspects?"
Top
2022
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (09 June 2022). "Surface finishing of EBM parts by (electro-)chemical etching" [Paper presentation]. 6th CIRP Conference on Surface Integrity.
  • Beuscart, T., Rivière, E., Ducobu, F., & Arrazola, P.-J. (08 June 2022). "Hole quality analysis of AISI 304-GFRP stacks using robotic drilling" [Paper presentation]. 6th CIRP Conference on Surface Integrity.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). "Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V" [Paper presentation]. 25th International Conference on Material Forming, ESAFORM 2022.
Colloques et congrès scientifiques/Communication publiée dans un périodique
Colloques et congrès scientifiques/Communication poster
  • Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). "Pellets Additive Manufacturing of dense Tosoh black zirconia parts" [Poster presentation]. Conférence internationale Matériaux 2022, Lille, France.
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). "Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM)" [Poster presentation]. Mardi des chercheurs, Mons, Belgium.
  • Spitaels, L., Rivière, E., Bossu, J., & Ducobu, F. (September 2022). "Hybrid Manufacturing of Complex Ceramic Parts with Tight Tolerances and Smooth Surface Topography" [Poster presentation]. Mardi des Chercheurs - onzième éditions (2022), Mons, Belgium.
  • Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (01 June 2022). "Performances assessment of two FDM printers using a benchmark artifact" [Poster presentation]. euspen's 22 nd International Conference & Exhibition.
Mémoires et thèses/Thèse de doctorat
  • Gonze, N. (2022). "Understanding of rock cutting mechanism under confinement" [Doctoral thesis, UMONS - Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/44534
Conférences scientifiques dans des universités ou centres de recherche/Conférence scientifique dans des universités ou centres de recherche
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). "HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM" [Paper presentation]. Conférence méca, Mons, Belgium.
  • Leroy, C., Lavernhe, S., & Rivière, E. (21 October 2022). "Lissage et rééchantillonnage de trajectoires curvilinéaires par splines d'Hermite" [Paper presentation]. Manufacturing 21, Gif-sur-Yvette (Paris), France.
Top
2021
Périodiques scientifiques/Article
  • None
  • None
  • Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. "Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology", 99-102.
  • None
  • None
  • Beuscart, T., Arrazola, P., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque. "24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 2373". doi:10.25518/esaform21.2373
  • None
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (24 May 2021). "Binder influence on green ceramic machining by means of milling and laser machining" [Paper presentation]. 9th CIRP Conference on High Performance Cutting, HPC 2020.
  • Beuscart, T., Arrazola, P.-J., Rivière, E., & Ducobu, F. (14 April 2021). "Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque" [Paper presentation]. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021.
Colloques et congrès scientifiques/Communication publiée dans un ouvrage
  • Rivière, E., Broz Lofetigo, A., Dehombreux, P., Dvorak, J., Equeter, L., Hosnedl, S., Marketa, K., Lazaroi Lechuga, E., Lindell, M., Lindgern, P., Nemec, L., Neuvonen, T., Olivier, B., Ranalli, M., Varhelahti, M., Varona Alabern, M., Verlinden, O., & Cepickova, J. (2021). MUPIC: MULTIDISCIPLINARY PROJECT IN AN INTERNATIONAL CONTEXT. In Hans-Ulrich Heiss (Ed.), "Proceedings of SEFI 49th Annual Conference Blended Learning in Engineering Education: challenging, enlightening – and lasting?"Berlin, Unknown/unspecified: Technische universitat Berlin.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Dambly, V., Huynh, H. N., Verlinden, O., & Rivière, E. (2021). Coupled multibody model of industrial robot with milling simulator for trajectory compensation. "ECCOMAS Multibody Dynamics Conference Proceedings". doi:10.3311/ECCOMASMBD2021-139
  • Dambly, V., Huynh, H. N., Rivière, E., & Verlinden, O. (2021). Development of tri-dexel based cutting simulator for cutter-workpiece engagement and cutting forces determination. "Procedia euspen".
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (2021). "Influences of cutting speed and material constitutive models on chip formation and their effects on the results of Ti6Al4V orthogonal cutting simulation" [Paper presentation]. ESAFORM 2021, Liège, Belgium.
Colloques et congrès scientifiques/Communication poster
  • Spitaels, L., Rivière, E., Anthonin, D., & Ducobu, F. (June 2021). "Development of a novel benchmark artifact for Additive Manufacturing processes" [Poster presentation]. euspen’s 21st International Conference & Exhibition.
  • Dambly, V., Verlinden, O., & Rivière, E. (20 March 2021). "Robotic Milling: Development of 3D milling forces computation module for tool trajectories adaptation" [Poster presentation]. Mardi des chercheurs, Valenciennes, France.
  • Beuscart, T., Ducobu, F., & Rivière, E. (2021). "Etude de l'usinage robotique de stacks métaux-composites" [Poster presentation]. Mardi des chercheurs 2021, Valenciennes, France.
Top
2020
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (15 August 2020). "Prediction of local sintering in laser beam machining of green Y-TZP ceramic" [Paper presentation]. 69th CIRP General Assembly, Munich, Germany.
  • Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (04 April 2020). "Influence of conventional machining on chemical finishing of Ti6Al4V electron beam melting parts" [Paper presentation]. 23rd International Conference on Material Forming, ESAFORM 2020.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Kugalur Palanisamy, N., Ducobu, F., Rivière, E., & Arrazola, P. (2020). "Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation" [Paper presentation]. Esaform 2020, Cottbus , Germany.
Colloques et congrès scientifiques/Communication poster
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (08 June 2020). "A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic" [Poster presentation]. 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020.
Mémoires et thèses/Thèse de doctorat
  • Equeter, L. (2020). "Optimal Replacement of Cutting Tools through Degradation Monitoring Techniques and Residual Lifetime Prediction Models" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/14715doi:10.13140/RG.2.2.23962.06080
  • Demarbaix, A. (2020). "Characterization of Green Ceramic Machining (GCM) by means of milling and laser in order to develop a new manufacturing chain for ceramic (MACHCERAM)" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/29767
Top
2019
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (11 July 2019). "Développement d'une platforme hybride pour la mise en forme de la céramique" [Paper presentation]. Manufacturing 21, Mons, Belgium.
  • Rivière, E., Huynh, H. N., Verlinden, O., & Ducobu, F. (13 June 2019). "Cutting force prediction in robotic machining" [Paper presentation]. 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.
  • Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (01 June 2019). "Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3" [Paper presentation]. 17th CIRP conference on modelling of machining operations, Sheffield, Unknown/unspecified.
  • Dolimont, A., Santos Macias, J. G., Lv, Z., Simar, A., & Rivière, E. (29 May 2019). "Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM)" [Paper presentation]. 4th Workshop in AM, Leuven, Belgium.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (08 May 2019). "Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process" [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). "Performance simulation of different toolpaths in 2D1/2 pocket milling" [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (01 May 2019). "Chemical etching as a finishing process for electron beam melting (EBM) parts" [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (01 May 2019). "Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism" [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.
  • Ducobu, F., & Rivière, E. (21 February 2019). "Transition of the finite element modelling of orthogonal cutting (2D) to oblique cutting (3D)" [Paper presentation]. CIRP Winter Meetings, Paris, France.
  • Leroy, C., Rivière, E., & Ducobu, F. (14 January 2019). "Evaluation de l'efficacité temporelle de trajectoires en fraisage à l'aide de VPOp" [Paper presentation]. Manufacturing 21, Toulon, France.
Colloques et congrès scientifiques/Communication poster
  • Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). "An Integrative Approach for Estimating Cutting Tools Wear in Turning" [Poster presentation]. MS&T2019, Portland, United States - Oregon.
  • Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). "Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining" [Poster presentation]. 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019.
  • Demarbaix, A., Rivière, E., Ducobu, F., & Petit, F. (03 April 2019). "Hybrid platform: sequential combination of two technologies in shaping of ceramic materials" [Poster presentation]. young Ceramists Additive Manufacturing Forum (yCAM), Mons, Belgium.
  • Huynh, H., Rivière, E., & Verlinden, O. (05 March 2019). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
  • Leroy, C., Rivière, E., & Ducobu, F. (05 March 2019). "Evaluation de l'efficacité temporelle de trajectoires d'évidement 2D1/2" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
Mémoires et thèses/Thèse de doctorat
  • Huynh, H. (2019). "Robotic machining: Development and validation of a numerical model of robotic milling to optimise the cutting parameters" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/35838
Allocutions et communications diverses/Article grand public
  • Demarbaix, A., Rivière, E., & Dehombreux, P. (2019). UMONS: Plongée en sous-marin. "journal sudinfo".
Allocutions et communications diverses/Autre
  • Rivière, E. (2019). "Journal télévisé RTBF: Coupe d'europe de robotique".
  • Rivière, E. (2019). "Télé MB: Les Atom-X se préparent pour la coupe de robotique".
Top
2018
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). "Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance?" [Paper presentation]. Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.
  • Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). "Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). "Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). "Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Benhassine, M., Rivière, E., Arrazola, P.-J., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). "2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Huynh, H., Kouroussis, G., Verlinden, O., & Rivière, E. (2018). "Modal updating of a 6-axis robot for milling application" [Paper presentation]. Proceedings of the 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan.
  • Huynh, H., Rivière, E., & Verlinden, O. (2018). "Multibody modelling of a flexible 6-axis robot dedicated to robotic machining" [Paper presentation]. The 5th Joint International Conference on Multibody System Dynamics, Lisbonne, Portugal.
Colloques et congrès scientifiques/Communication poster
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). "Hybrid machining of Ceramic: Combination sequential milling and laser machining" [Poster presentation]. The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). "Manumons" [Poster presentation]. 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France.
Mémoires et thèses/Thèse de doctorat
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). "Functionalization of Electron BeamMelting parts in order to guide finishing operations" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478
Allocutions et communications diverses/Article grand public
Top
2017
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). "REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL" [Paper presentation]. XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.
  • Huynh, H., Rivière, E., & Verlinden, O. (09 August 2017). "Report of robotic machining measurements using a Stäubli TX200 robot: application to milling" [Paper presentation]. ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE2017), Cleveland, United States - Ohio.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). "Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters" [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
  • Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs" [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.
  • Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). "The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation" [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). "Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters" [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Huynh, H., Verlinden, O., & Rivière, E. (2017). "Robotic Machining Simulation using a Simplified Multibody Model" [Paper presentation]. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar, Croatia.
Colloques et congrès scientifiques/Communication poster
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). "Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life" [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size" [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs" [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). "The Hybrid Machining of Ceramic The choice of production stage" [Poster presentation]. euspen's 17th International Conference & Exhibition, Hanovre, Germany.
  • Huynh, H., Rivière, E., & Verlinden, O. (07 March 2017). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). "Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). "Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Leroy, C., Wattiaux, D., Dolimont, A., & Rivière, E. (07 March 2017). "L'impression 3D comme outil d'aide dans un cours de géométrie" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). "Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). "Influence of process parameters on surface roughness of EBM" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "The Hybrid Machining of Ceramic: The choice of production stage" [Poster presentation]. 8e édition montoise du MdC2017, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size" [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.
Allocutions et communications diverses/Article grand public
Top
2016
Périodiques scientifiques/Article
  • None
  • None
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. "Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing".
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. "Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016".
  • None
  • None
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). "Study of the functionalization of electron beam melting part through machining" [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). "Characterization of electron beam melting process (EBM) : Capability approach" [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.
  • Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots" [Paper presentation]. MUGV 2016, Tours, France.
  • Verlinden, O., Huynh, H., & Rivière, E. (29 May 2016). "Modelling of flexible bodies with minimal coordinates by means of the co-rotational formulation" [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
  • Huynh, H., Rivière, E., & Verlinden, O. (29 May 2016). "Integration of machining simulation within a multibody framework: application to milling" [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). "Functionalization of Electron beam melting parts by Machining" [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.
  • Rivière, E., Huynh, H., & Verlinden, O. (17 May 2016). "Time step selection for the dynamic simulation of milling operations" [Paper presentation]. International conference on COmputational methods in Manufacturing Processes (ICOMP), Liège, Belgium.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). "Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining" [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Huynh, H., Rivière, E., & Verlinden, O. (15 September 2016). Milling Simulations with a 3-DOF Flexible Planar Robot. "International Journal of Industrial and Manufacturing Engineering, 10" (9), 1661-1670.
  • Wattiaux, D., Verlinden, O., Rivière, E., & Renotte, C. (2016). "Virtual and rapid prototyping to develop spatial visualization skills of students in engineering" [Paper presentation]. 44th Annual Conference of the European Society for Engineering Education (SEFI 2016), Tampere, Finland.
  • Leroy, C., Rivière, E., & Filippi, E. (2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots" [Paper presentation]. MUGV 2016, Tours, France.
  • Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). "Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche" [Paper presentation]. MUGV 2016, Tours, France.
Colloques et congrès scientifiques/Communication poster
  • Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). "Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "CEL Modelling of Ti6Al4V Orthogonal Cutting" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). "Development of the hybrid sequential machining: Laser machining and milling" [Poster presentation]. 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
  • Huynh, H., Rivière, E., & Verlinden, O. (18 May 2016). "Robotic machining: Development & validation of a robotic machining numerical model in order to optimize the cutting parameters" [Poster presentation]. 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). "Concept of the hybrid machining: the laser machining and milling" [Poster presentation]. Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.
  • Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). "Study of the functionalization of electron beam melting part through machining" [Poster presentation]. Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France.
Allocutions et communications diverses/Autre
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser".
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière".
Top
2015
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). "L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage" [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). "Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining" [Paper presentation]. 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.
  • Ducobu, F., & Rivière, E. (26 May 2015). "On going topics in modelling of machining" [Paper presentation]. Les nouvelles tendances et techniques d'usinage pour le secteur aérospatial, Wavre, Belgium.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). "Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling" [Paper presentation]. Esaform 2015, Graz, Austria.
  • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). "Uncertainty management of cutting forces parameters and its effects on machining stability" [Paper presentation]. 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.
Colloques et congrès scientifiques/Communication poster
  • Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). "Metrological analysis of electron beam melting process (EBM)" [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). "A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting" [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). "LAMAC: Usinage laser sur de la céramique « crue »" [Poster presentation]. The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). "Characterization of electron beam melting process (EBM) in order to enhance finishing operations" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). "A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting" [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). "Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). "Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Boulvain, J., VanParys, L., Rivière, E., Ducobu, F., & Legrain, H. (02 March 2015). "Improvement of underground investigation techniques: a soil model coupling Drucker-Prager & ALE" [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.
Documents pédagogiques/Notes de cours et syllabus
  • Rivière, E. (2015). "Topographie : Notes de cours".
  • Rivière, E., Dolimont, A., Leroy, C., & Wattiaux, D. (2015). "Géométries et communication graphique - exercices".
Allocutions et communications diverses/Autre
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). "Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté".
Top
2014
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche" [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Leroy, C., Rivière, E., & Filippi, E. (2014). "TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE" [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). "TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE" [Paper presentation]. Eleventh International Conference on High Speed Machining, Prague, Czechia.
  • Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. "Proceedings of the eleventh international conference on high speed machining (HSM 2014)".
Colloques et congrès scientifiques/Communication poster
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Modèle thermique par éléments finis de différentes trajectoires en usinage laser" [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). "Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model" [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine" [Poster presentation]. 1st Research Day of the Materials Research Institute, Mons, Belgium.
  • Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche" [Poster presentation]. Journée des chercheurs de l'Institut Matériaux, Mons, Belgium.
Mémoires et thèses/Mémoire de licence/master
  • Boulvain, J. (2014). "A contribution to the simulation of soil testing" [Master’s dissertation, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/7420
Documents pédagogiques/Notes de cours et syllabus
  • Rivière, E., Filippi, E., & Dehombreux, P. (2014). "Construction des machines et procédés de fabrication : Notes de cours".
Top
2013
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). "Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V" [Paper presentation]. CIRP Conference on Modeling of Machining Operations, Turin, Italy.
  • Rivière, E., & Filippi, E. (18 April 2013). "Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation" [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). "Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique" [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). "A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V" [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium.
Colloques et congrès scientifiques/Communication poster
  • Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting" [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany.
  • Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). "Optimisation de l'usinage de cavités par fraisage" [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). "Finition des pièces mécaniques à la sortie d'une production additive" [Poster presentation]. 7ème édition de la Matinée de Chercheurs, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting" [Poster presentation]. Matinée des Chercheurs 2013, Mons, Belgium.
Mémoires et thèses/Thèse de doctorat
  • Letot, C. (2013). "Maintenance prévisionnelle d'équipements industriels basée sur la modélisation, l'estimation et la simulation de lois de dégradation" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23018
  • Ducobu, F. (2013). "Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/35573
Top
2012
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). "Chip Formation in Microcutting" [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). "Dynamic simulation of the micro-milling process including minimum chip thickness" [Paper presentation]. 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Ducobu, F., Rivière, E., & Filippi, E. (2012). "Chip Formation in Micro-cutting" [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
Allocutions et communications diverses/Article grand public
  • None
  • None
Top
2011
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). "A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V" [Paper presentation]. CIRP conference on modelling of machining operations, Sintra, Portugal.
  • Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). "Experimental study of parameter-dependent analytical cutting force model" [Paper presentation]. Matinée des chercheurs, UMONS, Belgium.
Colloques et congrès scientifiques/Communication publiée dans un périodique
Colloques et congrès scientifiques/Communication poster
  • Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). "Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis" [Poster presentation]. 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
Allocutions et communications diverses/Article grand public
  • None
  • None
  • None
Top
2010
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting" [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.
  • Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). "Orthogonal Cutting Simulations with Abaqus/Explicit - Current results" [Paper presentation]. Simulia Academic Seminar 2010, Leuven, Belgium.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Ducobu, F., Rivière, E., & Filippi, E. (2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting" [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.
Colloques et congrès scientifiques/Communication poster
  • Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). "Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis" [Poster presentation]. Matinée des Chercheurs, Bruxelles, Belgium.
Allocutions et communications diverses/Article grand public
  • None
  • None
Top
2009
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale" [Paper presentation]. 19ème Congrès Français de Mécanique, Marseille, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). "Investigations on chip formation in micro-milling" [Paper presentation]. International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation in Micromilling" [Paper presentation]. 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.
Colloques et congrès scientifiques/Communication publiée dans un périodique
  • Fleurquin, G., Lesenne, J.-M., Dehombreux, P., & Rivière, E. (2009). "Optimisation de la maintenance de lignes continues de production" [Paper presentation]. PErformances et Nouvelles TechnolOgies en Maintenance, Autrans, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale" [Paper presentation]. Congrès Français de mécanique, Marseille, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip formation in micro-milling" [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Paper presentation]. CIRP conference on modelling of machining operations, San Sebastian, Spain.
Colloques et congrès scientifiques/Communication poster
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Poster presentation]. 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.
  • Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). "Identification de modèles d'efforts de coupe en fraisage" [Poster presentation]. Lab' insight, Louvain-la-Neuve, Belgium.
  • Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.
Top
2008
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). "Phénomènes de coupe en micro-fraisage par enlèvement de copeaux" [Paper presentation]. Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.
Colloques et congrès scientifiques/Communication publiée dans un périodique
Colloques et congrès scientifiques/Communication poster
  • Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). "Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux" [Poster presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.
Top
2007
Périodiques scientifiques/Article
Colloques et congrès scientifiques/Communication publiée dans un périodique
Colloques et congrès scientifiques/Communication poster
  • Rivière, E. (13 March 2007). "Forces, vibrations and roughness prediction in milling using dynamic simulation" [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.
  • Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). "Etude et simulation des procédés d'usinage à grande vitesse" [Poster presentation]. Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.
Mémoires et thèses/Thèse de doctorat
  • Rivière, E. (2007). "Etude et simulation de procédés de fraisage grande vitesse : stabilité, efforts de coupe, états de surface" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/34551
Top
2006
Colloques et congrès scientifiques/Communication orale non publiée/Abstract
  • Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). "Forces, vibrations and roughness prediction in milling using dynamic simulation" [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
  • Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). "Chatter detection using a microphone" [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
Colloques et congrès scientifiques/Communication publiée dans un périodique
Top