Publications
Fabienne DELAUNOIS
Open the Institutional Repository
Number of publications : 313
    2024
    Scientific journals/Short communication
    Scientific journals/Article
    • Mégret, A., Vitry, V., & Delaunois, F. (2024). Failure Analysis of a Ball Milling Machine, Used for the Preparation of Cemented Carbide Composites. "Journal of Failure Analysis and Prevention". doi:10.1007/s11668-024-01947-1
    • Hamdi, I., Boumerzoug, Z., Bedjaoui, O., Melik, W., & Delaunois, F. (14 May 2024). Thermal Cycle Simulation of Heat Affected Zone in the Welded Mild Steel. "Key Engineering Materials, 981", 43-50. doi:10.4028/p-4rswbo
    • Chettah, M., Hamdi, I., Boumerzoug, Z., Bedjaoui, W., & Delaunois, F. (01 March 2024). Solid State Diffusion Bonding of Alumina with Aluminum Alloy. "International Journal of Automotive and Mechanical Engineering, 21" (1), 11010 – 11017. doi:10.15282/ijame.21.1.2024.05.0851
    • Das, A., Zajac, M., Huang, W.-H., Chen, C. L., Kandasami, A., Delaunois, F., Noirfalise, X., & Bittencourt, C. (01 January 2024). Evolution of structural phase transition from hexagonal wurtzite ZnO to cubic rocksalt NiO in Ni doped ZnO thin films and their electronic structures. "Physica Scripta, 99", 015521. doi:10.1088/1402-4896/ad16b1
    • Klumpp, R. E., Akbarzadeh, S., de Sousa Araujo, J. V., Gonon, M. F., Delaunois, F., Costa, I., & Olivier, M. (2024). Correlating corrosion modes with the microstructure of the 2XXX series alloys: A comparative approach. "Surface and Interface Analysis". doi:10.1002/sia.7321
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Mégret, A., Delaunois, F., Vitry, V., Quenon, C., & Simon, S. (28 November 2024). "Apport des analyses métallurgiques dans l'étude d'objets métalliques de la région de Mons" [Paper presentation]. Journées d'Archéologie en Wallonie 2024.
    Scientific congresses and symposiums/Paper published in a journal
    • Mégret, A., Prince, L., Vitry, V., & Delaunois, F. (2024). Corrosion and tribological characterizations of a recycled tungsten carbide powder. "Euro PM2024 Congress Proceedings".
    • Bossu, J., Rivière, E., Spitaels, L., Ducobu, F., Delaunois, F., Martic, G., Delmotte, C., Juste, E., & Petit, F. (2024). Green machining of Ti6Al4V/Polymers composite made by pellets additive manufacturing. "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-210
    Scientific congresses and symposiums/Poster
    • Mégret, A., Quenon, C., Vitry, V., & Delaunois, F. (26 March 2024). "Etude métallographique des objets métalliques retrouvés lors des fouilles du Château de Boussu en 2023" [Poster presentation]. Mardi des Chercheurs 2024.
    • Mégret, A., Vitry, V., & Delaunois, F. (06 February 2024). "Study Of Niobium Carbide As Grain Growth Inhibitor In Cemented Tungsten Carbides" [Poster presentation]. 18th European Inter-Regional Conference on Ceramics.
    Scientific conferences in universities or research centers/Scientific conference in universities or research centers
    • Bossu, J., Rivière, E., Spitaels, L., Delaunois, F., Ducobu, F., Delmotte Cathy, & Martic Grégory. (20 March 2024). "Composite Ti-6Al-4V/Polymers Pellets Additive Manufacturing: improvement of the printing parameters to obtain dense and defectless part" [Paper presentation]. Metal AMS, Senlis, France.
    Top
    2023
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Fabrice Petit, Cathy Delmotte, Grégory Martic, Enrique Juste, Spitaels, L., Rivière, E., Ducobu, F., Bossu, J., & Delaunois, F. (29 September 2023). "Evaluation of the suitability of Pellet Additive Manufacturing technology for the design & manufacturing of complex ceramic parts" [Paper presentation]. IWAC (INTERNATIONAL WORKSHOP ON ADVANCED CERAMICS, IWAC09), Limoges, France.
    • Stanciu, V. I., Mégret, A., Vitry, V., & Delaunois, F. (28 June 2023). "Investigation about the possibility to make cemented carbide structures by reactive sintering" [Paper presentation]. Workshop for Multi-Functional Materials: from Synthesis to Applications, Valencienne, France.
    • Mégret, A., Vitry, V., & Delaunois, F. (07 June 2023). "Substitution du cobalt par un alliage nickel-bore dans les carbures cémentés" [Paper presentation]. La Métallurgie: quel avenir!, Grenoble, France.
    • Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (01 June 2023). "Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing" [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
    Scientific congresses and symposiums/Paper published in a journal
    • Mégret, A., Rodriguez, P., Broeckmann, C., Vitry, V., & Delaunois, F. (2023). Influence of the amount of recycled cemented carbide powder on the mechanical properties of WC-Co parts sintered by unconventional technologies. "Euro PM2023 Congress Proceedings".
    Dissertations and theses/Doctoral thesis
    • Mégret, A. (2023). "Recyclability of cemented carbide powder: optimisation of milling and sintering parameters" [Doctoral thesis, UMONS - Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/46539
    Diverse speeches and writings/Communication in media
    • Delaunois, F. (2023). "Le singe de la grand-place de Mons date du 15e siècle". RTBF.be.
    • Delaunois, F. (2023). "Le singe du Grand’Garde, porte-bonheur de Mons, daterait du XVe siècle". La Dernière heure.
    • Delaunois, F. (2023). "Découverte importante à Mons : pour la Faculté Polytechnique, le Singe du Grand'Garde date du 15e siècle !" Sudinfo.
    • Delaunois, F. (2023). "Le singe du Grand’Garde daterait du 15e siècle !" La Province.
    • Delaunois, F. (2023). "Le singe de Mons pourrait dater du 15e siècle!" TéléMB - Journal parlé.
    Top
    2022
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Mégret, A., Vitry, V., & Delaunois, F. (26 October 2022). "Etudes thermodynamique et mécanique de nouveaux liants pour les carbures de tungstène" [Paper presentation]. Matériaux 2022, Lille, France.
    • Delaunois, F., Mégret, A., & Vitry, V. (13 September 2022). "Teaching good practices in Failure Analysis to students to help them react efficiently to damage in their professional career" [Paper presentation]. IMAT2022, New Orleans, United States.
    • Vitry, V., Papanaoum, M., Mégret, A., & Delaunois, F. (13 September 2022). "Even failure analysts can blow things up, it seems" [Paper presentation]. IMAT 2022, New Orleans, United States - Louisiana.
    Scientific congresses and symposiums/Paper published in a journal
    • Mégret, A., Vitry, V., & Delaunois, F. (2022). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. "Proceeding of 20th Plansee Seminar".
    Scientific congresses and symposiums/Poster
    • Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). "Pellets Additive Manufacturing of dense Tosoh black zirconia parts" [Poster presentation]. Conférence internationale Matériaux 2022, Lille, France.
    • Mégret, A., Leclef, A., Vitry, V., & Delaunois, F. (06 September 2022). "Thermodynamic and mechanical investigations of novel binders for cemented carbides" [Poster presentation]. Mardi des Chercheurs 2022 (MdC2022), Mons, Belgium.
    • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). "Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM)" [Poster presentation]. Mardi des chercheurs, Mons, Belgium.
    Diverse speeches and writings/Communication in media
    • Delaunois, F. (2022). "Le petit singe de la Grand'Place de Mons a subi une série de tests à l'UMons (RTL-TVI - RTL Info)". Belgium: RTL-TVI - RTL Info.
    • Delaunois, F. (2022). "Le Singe du Grand’Garde passe des examens de santé (Sud Presse)". Belgium: Sud Presse.
    • Delaunois, F. (2022). "Le singe de Mons de passage dans les locaux de l’UMons afin de passer une série de tests (La Libre Belgique)". Belgium: La Libre Belgique.
    • Delaunois, F. (2022). "Mons : le petit singe fétiche autopsié (VivaCité - RTBF La Première - RTBF - La Une)". Belgium: VivaCité - Journal Parlé - Ed. nationale 17h00.
    • Delaunois, F. (2022). "Mons - Les mystères du singe bientôt élucidés ? (Télé MB)". Belgium: Télé MB.
    • Delaunois, F. (2022). "Le Singe de la ville de Mons subit quelques tests". Belgium: RTL-TVI - RTL Info Bienvenue.
    Scientific conferences in universities or research centers/Scientific conference in universities or research centers
    • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). "HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM" [Paper presentation]. Conférence méca, Mons, Belgium.
    Top
    2021
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Vitry, V., Bonin, L., & Delaunois, F. (14 September 2021). "Towards Lead-free electroless nickel-boron plating" [Paper presentation]. Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.
    • Delaunois, F., Mégret, A., & Vitry, V. (13 September 2021). "Interest in advanced microscopy for the failure analysis of metallic components" [Paper presentation]. Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.
    • Delaunois, F., Mégret, A., & Vitry, V. (23 June 2021). "Failure analysis of metallic components due to improper materials and fabrication method" [Paper presentation]. ICEAF VI : Conference of Engineering Against Failure, Virtual, Greece.
    • Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (01 June 2021). "Electroless nickel boron coatings, can it replace hard chrome?" [Paper presentation]. Thermec'2021, Graz, Austria.
    • Delaunois, F., Stanciu, V. I., Erauw, J.-P., & Vitry, V. (01 June 2021). "The effect of the proportion of doped binder on the microstructure and properties of WC-Co composites" [Paper presentation]. Thermec'2021, Graz, Austria.
    Scientific congresses and symposiums/Poster
    • Mégret, A., Sibille, T., Vitry, V., & Delaunois, F. (30 March 2021). "Study of the stability of electroless cobalt boron baths - E-WC project" [Poster presentation]. Mardi des Chercheurs 2021, Valenciennes, France.
    Top
    2020
    Scientific journals/Article
    • Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. "Surface and Coatings Technology, 401".
    • Hamdi, I., Boumerzoug, Z., & Delaunois, F. (24 August 2020). Simulation of Heat Affected Zone in X60 Steel. "Insights in Mining Science & Technology, 6", 52-58.
    • Raouache, E., Boumerzoug, Z., Delaunois, F., & Khalfallah, F. (01 May 2020). Investigation by Thermal Cycle Simulation of Heat Affected Zone in Welded AA2014 Aluminum Alloy. "Research & Development in Material Science, 13" (3), 1407-1411. doi:10.31031/RDMS.2020.13.000812
    • Bonin, L., Vitry, V., & Delaunois, F. (30 April 2020). Replacement of Lead stabilizer in electroless Nickel-Boron baths: Synthesis and characterization of coatings from bismuth stabilized bath. "Sustainable Materials and Technologies, 23".
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (20 April 2020). Influence of the milling parameters on the sintering behaviour of WC-Co composites. "Materials and Manufacturing Processes, 35" (7), 811-816. doi:10.1080/10426914.2020.1743850
    • Mdehheb, Z., El Kihel, B., Bouamama, M., Hammouti, B., & Delaunois, F. (20 February 2020). The environmental management system and its application impacts on the business economy in the eastern region of morocco. "Caspian Journal of Environmental Sciences, 18" (1), 13-20.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (01 February 2020). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. "International Journal of Refractory Metals and Hard Materials, 87", 51-60.
    • Khoshnaw, F., Vitry, V., & Delaunois, F. (05 January 2020). Feasibility Study of Using Thermal Simulator to Observe Metallurgical Aspects of Welded Duplex Stainless Steel. "International Journal of Advances in Science Engineering and Technology, 7" (4), 50-55.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Vitry, V., Stanciu, V. I., & Delaunois, F. (06 March 2020). "Second advice: how failure analysis of metallic components can bring very different results when carried out by different labs, while it should not" [Paper presentation]. SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.
    Diverse speeches and writings/Other
    • Delaunois, F. (2020). "Mons-Borinage: Une terre fertile pour les champs photovoltaïques".
    Scientific conferences in universities or research centers/Scientific conference in universities or research centers
    • Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (07 March 2020). "Electroless nickel-boron coatings, can it replace hard chrome?" [Paper presentation]. SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.
    Top
    2019
    Parts of books/Contribution to collective works
    • Vitry, V., & Bonin, L. (2019). Polyalloyed Electroless Nickel Plating. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), "Electroless Nickel Plating: Fundamentals to applications" (pp. 303-330). CRC Press.
    • Bonin, L., & Vitry, V. (2019). Applications of Electroless Nickel and Practical Aspects. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), "Electroless Nickel Plating: Fundamentals to applications" (pp. 411-424). CRC Press.
    • Vitry, V. (2019). Electroless Nickel-Boron-Part B: Posttreatments for Electroless Nickel-Boron. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), "Electroless Nickel Plating: Fundamentals to applications" (pp. 223-262). CRC Press.
    • Delaunois, F. (2019). Electroless Nickel-Boron - Part A: As-Plated Electroless Nickel-Boron. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), "Electroless Nickel Plating: Fundamentals to applications" (pp. 173-222). CRC Press.
    Scientific journals/Article
    • Khathyri, F., Elkihel, B., & Delaunois, F. (01 December 2019). Review of damages prediction in a composite material at low velocity impact. "Global Journal of Engineering and Technology Advances, 1" (1), 27-42.
    • HAMZA, S., Boumerzoug, Z., Raouache, E., & Delaunois, F. (16 September 2019). Simulated heat affected zone in welded stainless steel 304L. "Acta Metallurgica Slovaca, 25" (3), 142-149.
    • Bakdid, A., El Kihel, B., Nougaoui, A., & Delaunois, F. (25 August 2019). Three-Dimensional Characterization of Weld Defects in a Steel Material. "Journal of Engineering and Applied Sciences, 14" (6), 1928 - 1932. doi:10.36478/jeasci.2019.1928.1932
    • Rachidi, R., Elkihel, B., & Delaunois, F. (01 February 2019). Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying. "Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 241", 13-21.
    • Rachidi, R., Elkihel, B., Delaunois, F., & Deschuyteneer, D. (01 January 2019). Effectiveness of phased array focused ultrasound and active infrared thermography methods as a nondestructive testing of Ni-WC coating adhesion. "Nondestructive Testing and Evaluation, 35" (2), 205-220.
    • Bonin, L., Vitry, V., & Delaunois, F. (01 January 2019). The tin stabilization effect on the microstructure, corrosion and wear resistance of electroless NiB coatings. "Surface and Coatings Technology, 357", 353-363.
    Books/Collective work published as editor or director
    • Delaunois, F., Bonin, L., Vitry, V., Begum, S., Cobley, A., Castano, J., Correa, E., Das, S. K., Echeverría, F., García-Lecina, E., Sudagar, J., Salicio Paz, A., Muraliraja, R., Sahoo, P., Selvakumar, A., Tamilarasan, T. R., Udayakumar, S., Urgen, M., Zuleta Gil, A. A., ... Vitry, V. (Ed.). (2019). "Electroless nickel plating: Fundamentals to applications". CRC Press.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Vitry, V., & Delaunois, F. (30 September 2019). "Doomed ! Parts that have made it through quality control and shouldn't have" [Paper presentation]. MS&T2019, Portland, United States - Oregon.
    • Vitry, V., Bonin, L., & Delaunois, F. (13 September 2019). "Corrosion resistance of electroless Ni-B-Sn alloys" [Paper presentation]. Eurocorr 2019, Sevilla, Spain.
    • Firrao, D., Dupont, P., Matteis, P., Pinasco, M. R., Ienco, G., Delaunois, F., & Vitry, V. (13 June 2019). "Failure analysis of a large extrusion gearbox An International FAS Network Analysis" [Paper presentation]. IGF25 - 25th International Conference - Fracture and Structural Integrity, Catania, Italy.
    • Stanciu, V. I., Erauw, J.-P., Vitry, V., & Delaunois, F. (09 April 2019). "Amélioration des propriétés mécaniques des alliages WC-Co par l'utilisation d'un liant dopé et frittage SPS" [Paper presentation]. Colloque Réseau National de la Métallurgie La Métallurgie, quel Avenir !, Nancy, France.
    • Mégret, A., Vitry, V., & Delaunois, F. (13 March 2019). "Effect of the addition of doped-cobalt on the properties of recycled tungsten carbide powder sintered by SPS" [Paper presentation]. Electric Field Enhanced Processing of Advanced Materials II: Complexities and Opportunities.
    Scientific congresses and symposiums/Paper published in a journal
    • Mégret, A., Vitry, V., & Delaunois, F. (2019). Impact of the Amount of Recycled Cemented Carbide Powder on the Sintering Behavior of WC-Co Parts. "Euro PM2019 Congress Proceedings".
    • Delaunois, F., DENIL, E., Marchal, Y., & Vitry, V. (2019). "Contribution to the study of portevin-le chatelier effect in aluminum alloy 2024" [Paper presentation]. MS&T2019, Portland, United States - Oregon.
    • Regad, Y., Elkihel, B., & Delaunois, F. (2019). "Modeling Approach of the Experiment: Waste Reuse of the Jerada Thermal Power Plant (Morocco)" [Paper presentation]. ICEERE 2018, Saidia, Morocco.
    Scientific congresses and symposiums/Poster
    • Stanciu, V. I., Vitry, V., Boilet, L., Erauw, J.-P., & Delaunois, F. (22 May 2019). "Influence d'un liant dopé sur les propriétés mécaniques des alliages WC Co" [Poster presentation]. Poudres 2019 - Matériaux frittés et fabrication additive, Grenoble, France.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (25 March 2019). "Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying" [Poster presentation]. 11th International Conference on the Science of Hard Materials (ICSHM11), Khao Lak, Thailand.
    • Mégret, A., Vitry, V., & Delaunois, F. (05 March 2019). "Study of the sinterability of a recycled tungsten carbide powder" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (05 March 2019). "Influence du pré-broyage de la poudre de WC sur la frittabilité des composites WC-Co" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    Dissertations and theses/Doctoral thesis
    • Rodriguez, J. (2019). "Corrosion mechanisms and protection of zinc-magnesium coatings applied on steel" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/7924
    • Stanciu, V. I. (2019). "Apport de la technique « Mechanical Alloying » à la production de composites WC-Co" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/19649
    Patents/Patent
    • Vitry, V., Bonin, L., & Delaunois, F. (21 August 2019). "BONICOAT".
    Diverse speeches and writings/Article for a general audience
    • Geelkens, M., & Delaunois, F. (2019). Les failles du recyclage. "LE VIF Numéro 26".
    Top
    2018
    Parts of books/Contribution to collective works
    • Bonin, L., Delaunois, F., & Vitry, V. (2018). Revêtements chimiques de nickel-bore. In "Techniques de l'Ingénieur - Paris" (pp. 1-19). Techniques de l'Ingénieur.
    Scientific journals/Article
    • Khathyri, F., Elkihel, B., & Delaunois, F. (01 December 2018). Non-Destructive Testing by Ultrasonic and Thermal Techniques of an Impacted Composite Material. "International Journal on Advanced Science, Engineering and Information Technology, 8" (6), 2360-2366.
    • Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (16 October 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. "Journal of Alloys and Compounds, 767", 276-284.
    • Delaunois, F., Stanciu, V. I., & Mario, S. (01 March 2018). Resistance to high-temperature oxidation and wear of various ferrous alloys used in rolling mills. "Metallurgical and Materials Transactions. Part A, 49" (3), 822-835.
    • Bonin, L., Vitry, V., & Delaunois, F. (23 February 2018). Corrosion behaviour of electroless high boron-mid phosphorous nickel duplex coatings in the as-plated and heat-treated states in NaCl, H2SO4, NaOH and Na2SO4 media. "Materials Chemistry and Physics, 208", 77-84.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Mégret, A., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (21 November 2018). "Frittage des carbures de tungstène-cobalt recyclés" [Paper presentation]. Matériaux 2018, Strasbourg, France.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (20 November 2018). "Nouvelle approche en vue d'introduire des inhibiteurs de croissance des grains dans les carbures cémentés" [Paper presentation]. Matériaux 2018, Strasbourg, France.
    • Vitry, V., & Delaunois, F. (17 October 2018). "Gamification of metallographic lab practice teaching by failure analysis" [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.
    • Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). "'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 2/2 : From Failure Analysis to Prevention, an International FAS Network Answer:'" [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.
    • Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). "'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 1/2 : The Case Study an Internationbal FAS Network Analysis'" [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (04 October 2018). "Effect of doped binder on the microstructure of a WC-Co composite" [Paper presentation]. Euro PM2018 Congress & Exhibition, Bilbao, Spain.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (18 September 2018). "Impact of WC-Co powder preparation on the SPS sintering behavior" [Paper presentation]. 2018 World Congress on Powder Metallurgy, Beijing, China.
    • Tosar, F., Delaunois, F., Vitry, V., & Groulard, F. (11 September 2018). "Stainless steel corrosion in pharmaceutical industries: Rouging study in laboratory conditions" [Paper presentation]. Eurocorr 2018, Krakow, Poland.
    • Delaunois, F., Blanchard, P., Rigot, O., & Kairet, T. (11 July 2018). "Microstructure and porosity of Ti-6Al-4V samples produced by Electron Beam Melting" [Paper presentation]. thermec 2018, Paris, France.
    • Bonin, L., Vitry, V., & Delaunois, F. (29 June 2018). "Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties" [Paper presentation]. SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.
    Scientific congresses and symposiums/Paper published in a book
    Scientific congresses and symposiums/Paper published in a journal
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). "Effect of doped binder on the microstructure of a WC-Co composite" [Paper presentation]. Euro PM2018 Congress & Exhibition, Bilbao, Spain.
    • Mégret, A., Stanciu, V. I., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (2018). Unconventional Sintering of a Commercial Cemented WC-6Co Hardmetal. "Euro PM2018 Congress Proceedings".
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). "Impact of WC-Co powder preparation on the SPS sintering behavior" [Paper presentation]. 2018 World Congress on Powder Metallurgy, Beijing, China.
    Scientific congresses and symposiums/Poster
    • Vitry, V., Bonin, L., & Delaunois, F. (09 September 2018). "Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the tribocorrosion behavior" [Poster presentation]. Eurocorr 2018, Krakow, Poland.
    • Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (09 July 2018). "Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate" [Poster presentation]. thermec 2018, Paris, France.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (03 July 2018). "Effet de l'utilisation d'un liant dopé sur la microstructure des composites WC-Co" [Poster presentation]. 9e Colloque Sciences et Technologie des Poudres, Compiègne, France.
    • Mégret, A., Stanciu, V. I., Thuault, A., Vitry, V., & Delaunois, F. (19 June 2018). "Microwave sintering of cemented tungsten-cobalt carbides" [Poster presentation]. International Symposium on Inorganic and Environmental Materials, Gent, Belgium. doi:10.13140/RG.2.2.32962.89287
    • Delaunois, F., & Vitry, V. (11 April 2018). "The teaching of physical metallurgy based on the acquisition of soft-skills" [Poster presentation]. 10th International Materials Education Symposium, Cambridge, United Kingdom.
    • Mégret, A., Vitry, V., & Delaunois, F. (27 March 2018). "Unconventional sintering of cemented WC-Co carbides" [Poster presentation]. Mardi des Chercheurs 2018, Valenciennes, France. doi:10.13140/RG.2.2.31795.94242
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (27 March 2018). "Optimisation de l'homogénéisation des alliages WC-Co" [Poster presentation]. Mardi des Chercheurs (MdC2018), Valenciennes, France.
    • Bonin, L., Vitry, V., & Delaunois, F. (27 March 2018). "Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties" [Poster presentation]. Mardi des Chercheurs (MdC2018), Valenciennes, France.
    Top
    2017
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Delaunois, F., & Vitry, V. (24 October 2017). "Enseignement des alliages métalliques orienté compétences" [Paper presentation]. Journées Annuelles SF2M 2017, Lyon, France.
    • Vitry, V., Stanciu, V. I., Dupont, P., & Delaunois, F. (12 October 2017). "Failure of a helicopter rotor pinion" [Paper presentation]. MS&T2017, Pittsburgh, United States.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (02 October 2017). "Optimization Of The Introduction Of Grain Growth Inhibitor In Cemented Carbides" [Paper presentation]. Euro PM2017 Congress & Exhibition, Milano, Italy.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (19 September 2017). "Influence of grinding speed and balls diameter on the microstructure of a WC-10% wt doped binder" [Paper presentation]. RoPM&AM 2017, Cluj-Napoca, Romania.
    • Tosar, F., Vitry, V., Groulard, F., Mallet, L., & Delaunois, F. (05 September 2017). "Study of stainless steel corrosion in pharmaceutical facilities: Initiation and development" [Paper presentation]. EUROCORR2017, Prague, Unknown/unspecified.
    • Bonin, L., Vitry, V., & Delaunois, F. (06 July 2017). "Properties of Electroless Nickel-Boron coatings stabilized by bismuth salts" [Paper presentation]. SMT31 - International Conference on Surface Modification Technologies, Mons, Belgium.
    • Bonin, L., Vitry, V., & Delaunois, F. (04 July 2017). "Replacement of the lead stabilizer in electroless nickel-boron baths" [Paper presentation]. The 4th researchers workshop of the materials research institute, Mons, Belgium.
    • Delaunois, F., & Mario, S. (28 June 2017). "Effects of sub-critical and heat treatments on microstructure and hardness evolution of various grades of wear resistant cast iron" [Paper presentation]. IFHTSE17 (European Conference on Heat Treatment and Surface Engineering), Nice, Belgium.
    • Vitry, V., Bonin, L., & Delaunois, F. (28 June 2017). "Elimination du plomb dans un bain de nickel-bore chimique" [Paper presentation]. Congrès A3TS, Nice, France.
    • Delaunois, F., & Mario, S. (27 June 2017). "Effects of sub-critical and heat treatments on microstructure and hardness evolution of various grades of wear resistant cast iron" [Paper presentation]. IFHTSE17 (European Conference on Heat Treatment and Surface Engineering), Nice, Belgium.
    • Delaunois, F., Bonin, L., & Vitry, V. (13 June 2017). "Interest in composites formation to improve electroless nickel coatings properties" [Paper presentation]. World Congress on Advanced Materials WCAM2017, Xi'an, China.
    • Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). "Comparative Study of the Properties of WC Reinforced Ni-base Alloy Coatings Produced by Flame Spraying and by Laser Cladding" [Paper presentation]. International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (04 May 2017). "Influence de la vitesse de broyage et du diamètre de billes sur la microstructure d'un alliage WC-10%pds de cobalt dopé avec 1%pds de Cr3C2" [Paper presentation]. PMF2017, Toulouse, France.
    • Rachidi, R., Elkihel, B., Delaunois, F., & Deschuyteneer, D. (11 April 2017). "Non-destructive testing of adhesion defects in Ni-WC coating by focused ultrasound using phased array probe and active infrared thermography methods" [Paper presentation]. 7th International Conference on Industrial Engineering and Operations Management (IEOM), Rabat, Morocco.
    • El Anouar, B. A., Elamrani, M., Elkihel, B., & Delaunois, F. (11 April 2017). "Fault diagnosis of Rotating Machinery using Vibration Measurement: Application of the Wavelet Transform" [Paper presentation]. International Conference on Industrial Engineering and Operations Management, Rabat, Morocco.
    Scientific congresses and symposiums/Paper published in a journal
    Scientific congresses and symposiums/Poster
    • Vitry, V., & Delaunois, F. (04 July 2017). "Effect of SPS sintering on WC-Co powder densification" [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (04 July 2017). "Effect of SPS sintering on WC-Co powder densification" [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.
    • Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). "Non-destructive Testing of Adhesion Defects in Thick Composite Coating by Active Infrared Thermography Technique" [Poster presentation]. International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.
    • Rachidi, R., Elkihel, B., & Delaunois, F. (11 April 2017). "Influence of reinforcement particles in MMC coatings made by flame thermal spray technology" [Poster presentation]. 13ème congrès de mécanique (CMM2017), Meknès, Morocco.
    • Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 April 2017). "Anti-wear performance of NiCrBSi/NiCrBSi-WC coatings produced by flame thermal spraying process" [Poster presentation]. 13ème congrès de mécanique (CMM2017), Meknès, Morocco.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (07 March 2017). "Cobalt-inhibitors mixtures for cemented carbides" [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.
    • Bonin, L., Vitry, V., & Delaunois, F. (07 March 2017). "Electroless Nickel-Boron bath stabilized by bismuth salts: Effect of bismuth salts on the coatings" [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.
    • Vitry, V., & Delaunois, F. (06 March 2017). "Cobalt - inhibitors mixtures for cemented carbides" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    Dissertations and theses/Doctoral thesis
    • Nicolay, A. (2017). "Elaboration et caractérisation de revêtements nanocomposites hybrides nanoparticules/sol-gel multifonctionnels" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/28558
    Diverse speeches and writings/Article for a general audience
    • Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. "Polytech.News, 55".
    Top
    2016
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Rachidi, R., Elkihel, B., Delaunois, F., & Vitry, V. (01 December 2016). "Microstructure and Microhardness Properties of Flame Thermal Sprayed NiCrBSi Alloy and NiCrBSi-WC Composite Coatings" [Paper presentation]. 1st International Conference on Materials and Environmental Science (ICMES2016), Oujda, Morocco.
    • Vitry, V., Stanciu, V. I., & Delaunois, F. (26 October 2016). "Some study on the milling parameters optimization in the direct carburization of WO3 by mechanical alloying" [Paper presentation]. MS&T 2016, Salt Lake City, United States - Utah.
    • Delaunois, F., Stanciu, V. I., & Vitry, V. (26 October 2016). "How different laboratories can obtain various results in the same case of failure ?" [Paper presentation]. MS&T 2016, Salt Lake City, United States - Utah.
    • Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (19 October 2016). "Surveillance et Diagnostic du Désalignement d'un Moteur Asynchrone par la Technique Thermographie Infrarouge" [Paper presentation]. Colloque International sur le Monitoring des Systèmes Industriels, Fès, Morocco.
    • Vitry, V., Bonin, L., & Delaunois, F. (31 May 2016). "Can heat treatment improve duplex electroless nickel coatings?" [Paper presentation]. THERMEC'2016, Gratz, Austria.
    • Delaunois, F. (21 April 2016). "Various cases of failure of ferrous alloys components after use" [Paper presentation]. Les matériaux innovants et leurs applications, Oujda, Morocco.
    Scientific congresses and symposiums/Paper published in a journal
    • Delaunois, F., Tosar, F., & Groulard, F. (2016). "Study of the stainless steel corrosion in pharmaceutical facilities: development and incidence" [Paper presentation]. MS&T 2016, Salt Lake City, United States - Utah.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2016). "Nanostructured Mix of Tungsten Carbide with Cobalt for Wear Parts" [Paper presentation]. 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.
    • Bonin, L., Vitry, V., & Delaunois, F. (2016). "Influence of the anionic part of the surfactant on electroless nickel-boron coatings" [Paper presentation]. XXX International Conference on Surface Modification Technologies (SMT30), Milan, Italy.
    Scientific congresses and symposiums/Poster
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (09 October 2016). "Nanostructured mix of tungsten carbide with cobalt for wear parts" [Poster presentation]. 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (05 July 2016). "Influence of the speed and size of balls on the temperature during tungsten carbide production (WC) by mechanical alloying" [Poster presentation]. 3ème Journée de l'Institut Matériaux, Mons, Belgium.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (18 May 2016). "Influence de la température sur la production de carbure de tungstène (WC) par mechanical alloying" [Poster presentation]. Matinée des Chercheurs 2016, Université de Valencienne, France.
    Learning materials/Other
    • Dawant, S., Daubie, E., Delaunois, F., Vitry, V., Colmant, S., & Stanciu, V. I. (2016). "Etude de faisabilite de mesures d'epaisseur de nickel sur supports d'acier par fluorescence X".
    Top
    2015
    Parts of books/Contribution to collective works
    • Delaunois, F., & Vitry, V. (2015). Electroless Nickel-Boron Coatings Process, Composition, Microstructure and Properties. In "Encyclopedia of Iron, Steel, and Their Alloys". Taylor & Francis Group, London.
    • Vitry, V., & Delaunois, F. (2015). Electroless nickel-phosphorous Vs electroless nickel-boron: comparison of hardness, abrasion resistance, scratch test response and corrosion behavior. In "Comprehensive Guide for Nanocoatings Technology, Volume 1: Deposition and Mechanism" (pp. 145-173). Nova Science Pub Inc.
    • Vitry, V., & Delaunois, F. (2015). Nanostructured Electroless nickel-boron deposition: initiation mechanism and formation, effect of bath chemistry modification. In "Comprehensive Guide for Nanocoatings Technology: Volume 3: Properties and Development" (pp. 283-308). Nova Science Pub Inc.
    Scientific journals/Article
    • Vitry, V., & Delaunois, F. (15 December 2015). Initiation of borohydride-reduced nickel boron plating on steels with various carbon and nickel content. "Applied Surface Science, 359", 692-703.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Tungsten carbide powder obtained by direct carburization of tungsten trioxide using mechanical alloying method. "Journal of Alloys and Compounds, 659", 302-308.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (28 October 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. "Advanced Materials Research, 1128", 51-57. doi:10.4028/www.scientific.net/AMR.1128.51
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopé avec Cr3C2. "Récents Progrès en Génie des Procédés", (107/2015).
    • Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (01 July 2015). Monitoring and diagnostic misalignment of asynchronous machines by infrared thermography. "Journal of Materials and Environmental Science, 6" (4), 1192-1199.
    • Boumerzoug, Z., Remli, F., & Delaunois, F. (01 January 2015). Effect of cutting speed during turning of low carbon steel on mechanical properties and surface roughness. "Advanced Materials Research, 1096", 340-345.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). "Production of tungsten carbide  nanopowders by mechanical alloying" [Paper presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    • Vitry, V., Tosar, F., Mallet, L., Bonin, L., & Delaunois, F. (08 October 2015). "Characterization by XRD and TEM of various electroless nickel-boron deposits" [Paper presentation]. Materials Science & Technology 2015, Columbus, United States.
    • Delaunois, F., Stanciu, V. I., & Vitry, V. (08 October 2015). "Analysis and technical diagnostics of various cases of failure of ferrous alloys components after use" [Paper presentation]. Materials Science & Technology 2015, Columbus, United States.
    • Vitry, V., Tosar, F., Bonin, L., & Delaunois, F. (09 June 2015). "Microstructural and mechanical characterization of mono and bi-layer electroless nickel coatings" [Paper presentation]. SurFin 2015, Rosemont, United States.
    • Bonin, L., Vitry, V., & Delaunois, F. (18 March 2015). "Comparison of different batch leaching tests on steelmaking slags" [Paper presentation]. Recycling 2015, Metz, France.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (06 March 2015). "Direct Carburization Of Tungsten Trioxide By Mechanical Alloying" [Paper presentation]. BRAMAT, Brasov, Romania.
    Scientific congresses and symposiums/Paper published in a journal
    • Bakdid, A., El Kihel, B., Delaunois, F., & Nougaoui, A. (2015). "Technique de Contrôle de la Soudure par la Méthode d'Ultrason Multi-éléments" [Paper presentation]. CPI 2015 (Xème Conférence Internationale : Conception et Production Intégrées), Tanger, Morocco.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). "Tungsten carbide nano powder obtained by mechanical alloying in high energy mill" [Paper presentation]. SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.
    • Bonin, L., Vitry, V., & Delaunois, F. (2015). "Leaching of hexavalent chromium from stainless steelmaking slags and the pH influence on the chromium mobility" [Paper presentation]. SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.
    • Delaunois, F., Tosar, F., Vitry, V., & Hantson, A.-L. (2015). "Incidence of microbial corrosion of metallic tubes in sanitary facilities" [Paper presentation]. EUROCORR 2015, Graz, Austria.
    • Vitry, V., Bonin, L., & Delaunois, F. (2015). "Microstructural, mechanical and tribological properties of electroless duplex NiP/NiB coatings on steel" [Paper presentation]. SMT29, Copenhagen, Denmark.
    • Regad, Y., El Kihel, B., & Delaunois, F. (2015). "Valorisation et caractérisation des déchets du Charbon : Application pour la centrale thermique de JERADA-Maroc" [Paper presentation]. Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco.
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (2015). "Diagnostic des défauts d'engrenage par analyse vibratoire" [Paper presentation]. Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco.
    • Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (2015). "Diagnostic de la Machine Asynchrone Triphasée par la Technique Thermographie Infrarouge" [Paper presentation]. Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco.
    • Rrhioua, A., El Kihel, B., Bakari, D., & Delaunois, F. (2015). "Diagnostic non destructif d'un accélérateur de particules à vocation médicale" [Paper presentation]. Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco.
    Scientific congresses and symposiums/Poster
    • Bonin, L., Vitry, V., & Delaunois, F. (11 September 2015). "Damage of Ni-P/Ni-B duplex coatings, after diamond scratch tests" [Poster presentation]. BSM Annual Meeting 2015: When Materials Meet Biology, Mons, Unknown/unspecified.
    • Bonin, L., Vitry, V., & Delaunois, F. (07 September 2015). "Electroless Ni-P/Ni-B Duplex Coatings: Microstructural and Mechanical Properties" [Poster presentation]. Mapping the Future of Materials Science, Paris, France.
    • Bonin, L., Vitry, V., & Delaunois, F. (08 May 2015). "Comparison of different batch leaching tests on steelmaking slags" [Poster presentation]. NANOWAL (The Wallonia Network for Nanotechnologies) and MAIN (The MAterials, Interfaces and Nanostructures Doctoral School) on Nanomaterials and Energy, Mons, Belgium.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (08 April 2015). "Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopée avec Cr3C2" [Poster presentation]. colloque STPMF 2015, Nancy, France.
    • Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (29 March 2015). "Mise en évidence de la consommation d'énergie d'un moteur asynchrone triphasée en introduisant de défauts d'alignement" [Poster presentation]. 1st International Conference on Applied Automation and Industrial Diagnostics, Djelfa, Algeria.
    • Bonin, L., Vitry, V., & Delaunois, F. (10 March 2015). "Comparison of different batch leaching tests on steelmaking slags" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (10 March 2015). "Some aspects of the production of nano tungsten carbide powder (WC) by mechanical alloying" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    Diverse speeches and writings/Other
    • Delaunois, F. (2015). "La canette de boisson a 80 ans".
    Top
    2014
    Parts of books/Contribution to collective works
    • Vitry, V., & Delaunois, F. (2014). Nanostructured electroless nickel-boron coatings for wear resistance. In "Anti-Abrasive Nanocoatings: Current and future applications" (pp. 157-200). Woodhead Publishing.
    Scientific journals/Article
    • Delaunois, F., Tosar, F., & Vitry, V. (01 June 2014). Corrosion Behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. "Bioelectrochemistry, 97" (c), 110-119.
    • Vitry, V., Sens, A., & Delaunois, F. (25 April 2014). Comparison of various electroless nickel coatings on steel: structure, hardness and abrasion resistance. "Materials Science Forum, 783-786", 1405-1413.
    • Tshimombo, A., Idrissi, H., Ahuka, A., Vitry, V., & Delaunois, F. (01 March 2014). 'Etude de l'influence de la contrainte appliquée à l'éprouvette en corrosion sous tension suivie par émission acoustique'. "Congo Sciences, 2" (1), 10-16.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Delaunois, F., Stanciu, V. I., Mario, S., & Vitry, V. (28 November 2014). "Caractérisation d'une fonte à haut chrome alliée au niobium pour des cylindres de laminoir" [Paper presentation]. Matériaux 2014, Montpellier, France.
    • Rachidi, R., El Kihel, B., Delaunois, F., & Vitry, V. (26 November 2014). "Etude microstructurale des revêtements WC-Co déposés par cladding laser sur l'acier avec différentes teneurs en Co" [Paper presentation]. Matériaux 2014, Montpellier, France.
    • Vitry, V., Tosar, F., & Delaunois, F. (24 November 2014). "Etude de l'initiation et de la formation de dépôts chimiques de nickel-bore sur divers substrats ferreux" [Paper presentation]. Matériaux 2014, Montpellier, France.
    • Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (14 October 2014). "Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test" [Paper presentation]. Materials Science & Technology 2014, Pittsburgh, United States.
    • Vitry, V., Tosar, F., & Delaunois, F. (08 September 2014). "Study of corrosion resistance of electroless duplex NiP/NiB coatings in different media by potentiodynamic polarisation and SEM observation" [Paper presentation]. EUROCORR 2014, Pise, Italy.
    • Delaunois, F. (12 June 2014). "Comprendre les aciers inoxydables, leurs structures, leurs propriétés" [Paper presentation]. Journée d'étude VOM-PROMOSURF, Le Roeulx, Belgium.
    • Vitry, V., Tosar, F., & Delaunois, F. (03 May 2014). "Mechanical properties, wear and scratch test resistance of various electroless nickel deposits" [Paper presentation]. ICMCTF, San Diego, United States - California.
    • Vitry, V., & Delaunois, F. (07 February 2014). "Revêtements de nickel chimique: propriétés mécaniques et tribologiques des dépôts au bore et au phosphore" [Paper presentation]. Journée Technique île de France et assemblée générale A3TS, Paris, France.
    Scientific congresses and symposiums/Paper published in a journal
    • Vitry, V., Steve, N., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (2014). "Study of the microstructure of two centrifugal cast high speed steels destined for hot strip mills applications" [Paper presentation]. Abrasion 2014, Stockholm, Sweden.
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (2014). "A ready to use Cr3C2 doped cobalt powder as binder in cemented carbides" [Paper presentation]. Metal2014, Brno, Unknown/unspecified.
    • Vitry, V., & Delaunois, F. (2014). "Corrosion protection of steel and aluminium alloys by electroless nickel-boron and duplex electroless NiP-NiB coatings" [Paper presentation]. IMTCE 2014 - International Symposium on Corrosion & Materials Degradation 2014, Kuala Lumpur, Malaysia.
    Scientific congresses and symposiums/Poster
    • Stanciu, V. I., Vitry, V., & Delaunois, F. (25 November 2014). "Broyage par voie humide d'une poudre de cobalt dopé avec Cr3C2 en tant que liant dans les carbures cémentés" [Poster presentation]. Matériaux 2014, Montpellier, France.
    • Tosar, F., Delaunois, F., & Hantson, A.-L. (25 November 2014). "Etudes bioélectrochimiques de la corrosion des aciers galvanisés employés dans les systèmes de distribution d'eau sanitaire" [Poster presentation]. Matériaux 2014, Montpellier, France.
    Top
    2013
    Scientific journals/Article
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Delaunois, F., Sens, A., & Vitry, V. (01 September 2013). "Do Nickel and Nickel Alloys Actually Passivate in Various Media?" [Paper presentation]. EUROCORR2013, Estoril, Portugal.
    • Delaunois, F., Sens, A., & Vitry, V. (03 June 2013). "Evolution de la chimie d'un bain de nickel-bore en cours de dépôt" [Paper presentation]. A3TS Marseille 2013 - TRAITEMENT DES MATERIAUX ET DES SURFACES - Perspectives 2020, Marseille, France.
    Scientific congresses and symposiums/Paper published in a journal
    • Vitry, V., Denollin, G., & Delaunois, F. (2013). "Observation of the structure and defects of ASTM A387 grade 22 steel solidified by continuous casting" [Paper presentation]. 19th IAS steel conference, Rosario, Argentina.
    • Regad, Y., Elkihel, B., Benbouazza, A., Azzaoui, H., Delaunois, F., & Dagrain, F. (2013). "Quantification de la résistance à l'usure abrasive des pastilles en diamant" [Paper presentation]. 11ème Congrès de Mécanique, Agadir, Morocco.
    Scientific congresses and symposiums/Poster
    • Vitry, V., Aubert, A., & Delaunois, F. (04 April 2013). "Implementing an evidence-based reform of a Material engineering curriculum" [Poster presentation]. 5th International Symposium on Materials Education, Cambridge, United Kingdom.
    • Demelenne, M., Scaillet, J.-C., Bossiroy, D., Hayen, R., VanParys, L., Descamps, T., Noël, J., Sens, A., & Delaunois, F. (12 March 2013). "Experimenting a medieval kiln for outlining specificities in the properties of ancient limes" [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium.
    • Vitry, V., Sens, A., & Delaunois, F. (12 March 2013). "Abrasion resistance of steel coated with various chemical nickel deposit" [Poster presentation]. 7ième Matinée des Chercheurs, Mons, Belgium.
    • Stanciu, V. I., & Delaunois, F. (12 March 2013). "The production of hard alloys by mechanical synthesis and SPS : To develop nanocrystallinecomposites based on WC-Co with a grain size <100 nmThe" [Poster presentation]. 7ième Matinée des Chercheurs, Mons, Belgium.
    Diverse speeches and writings/Other
    • Delaunois, F. (2013). "La bleusaille à la Polytech de l'UMONS".
    Top
    2012
    Scientific journals/Article
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (01 December 2012). Comparison of different methods for the detection bearing faults. "Journal of computer science and engineering, 16" (2), 1-6.
    • Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (01 November 2012). Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. "Applied Surface Science, 263", 640-647.
    • Vitry, V., Kanta, A. F., & Delaunois, F. (20 June 2012). Evolution of reactive concentration during borohydride-reduced electroless nickel-boron plating and design of a replenishment procedure. "Industrial and Engineering Chemistry Research, 51" (27), 9227-9234.
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (01 May 2012). Analysis and diagnosis of the different defects of the bearings and gearings by vibration analysis. "Journal of computer science and engineering, 13" (1), 29-34.
    • Vitry, V., Kanta, A. F., & Delaunois, F. (28 February 2012). Application of nitriding to electroless nickel-boron coatings: Chemical and structural effects; Mechanical characterization; Corrosion resistance. "Materials and Design, 39", 269-278.
    • Vitry, V., Kanta, A. F., Dille, J., & Delaunois, F. (11 February 2012). Structural state of electroless nickel-boron deposits (5 wt. % B): re-characterization by XRD and FIB-TEM. "Surface and Coatings Technology, 206", 3444-3449.
    • Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (11 February 2012). Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminium alloys. "Surface and Coatings Technology, 206", 3421-3427.
    • Vitry, V., Nardone, S., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (01 February 2012). Microstructure of two centrifugal cast high speed steels for hot strip mills applications. "Materials and Design, 34", 372-378.
    • Vitry, V., Kanta, A. F., Sens, A., & Delaunois, F. (01 January 2012). Tribological characterization of electroless nickel-boron coatings. "Advanced Materials Research, 409", 808-813.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Delaunois, F., Sens, A., & Vitry, V. (09 September 2012). "Corrosion behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems" [Paper presentation]. EUROCORR 2012, Istanbul, Turkey.
    • Vitry, V., Sens, A., & Delaunois, F. (08 June 2012). "Surface reinforcement of steel substrate by electroless nickel-boron" [Paper presentation]. 1st World Conference on Advanced Materials, Beijing, China.
    Scientific congresses and symposiums/Paper published in a journal
    • Vitry, V., Sens, A., & Delaunois, F. (2012). "Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel" [Paper presentation]. SurFin 2012, Las Vegas, United States - Nevada.
    • Vitry, V., Sens, A., & Delaunois, F. (2012). "Initial deposition of electroless nickel from borohydride-reduced bath on various ferrous alloys" [Paper presentation]. Metal 2012, Brno, Unknown/unspecified.
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (2012). "Analyse et diagnostic des différents défauts des roulements et engrenages par analyse vibratoire" [Paper presentation]. CIGIMS 2012 (Congrès International en Génie Industriel et Management des Systèmes), Fès, Morocco.
    Scientific congresses and symposiums/Poster
    • Vitry, V., Sens, A., & Delaunois, F. (27 July 2012). "Abrasion resistance of steel coated with various chemical nickel deposit" [Poster presentation]. Junior Euromat, Lausanne, Switzerland.
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (25 May 2012). "Analysis and diagnosis of the different defects of the bearings and gearings by vibration analysis" [Poster presentation]. 2SCS'12 (nternational Symposium on Security and Safety of Complex Systems), Agadir, Morocco.
    • Vitry, V., Sens, A., & Delaunois, F. (11 May 2012). "Abrasive wear resistance of steel coated with various electroless nickel coatings" [Poster presentation]. Journées Internationales Francophones de Tribologie, Aix-en-Provence, France.
    • Delaunois, F., Aubert, A., & Vitry, V. (14 April 2012). "Is there a future for teaching metallurgy in Belgium?" [Poster presentation]. Materials Education Symposium, Cambridge, United Kingdom.
    • Delaunois, F., Stanciu, V. I., Denollin, G., & Vitry, V. (01 March 2012). "Structure and defects of ASTM A387 grade 22 steel solidified by continuous casting" [Poster presentation]. La Matinée des chercheurs 2012, Bruxelles , Belgium.
    Dissertations and theses/Doctoral thesis
    • Motte, C. (2012). "Etude de la protection contre la corrosion de l'acier galvanisé en continu par un revêtement sol-gel modifié par des nano-argiles" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/18760
    • Romano, A.-P. (2012). "Etude des mécanismes d'initiation et du développement de la corrosion filiforme de l'aluminium revêtu par électrodéposition: application en automobile" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23464
    • Atmani, F. (2012). "Etude de l'inhibition de la corrosion de l'acier en milieu neutre par des composés organiques et inorganiques - Influence de la préparation de surface" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/28592
    Top
    2011
    Scientific journals/Article
    • Vitry, V., Kanta, A. F., & Delaunois, F. (25 December 2011). Mechanical and wear characterization of electroless nickel-boron coatings. "Surface and Coatings Technology, 206", 1879-1885.
    • Boumerzoug, Z., Raouache, E., & Delaunois, F. (01 October 2011). Thermal cycle simulation of welding process in low carbon steel. "Materials Science & Engineering : A, 530", 191-195.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Vitry, V., Kanta, A. F., & Delaunois, F. (13 September 2011). "Synthesis of nanocrystalline Ni-B alloy by electroless deposition and effect of heat treatments on their structural state" [Paper presentation]. Euromat 2011, Montpellier, France.
    • Vitry, V., Dagrain, F., Delaunois, F., & VanParys, L. (07 July 2011). "Characterization of the consolidation effect of ethyl silicate on Maastricht limestone" [Paper presentation]. ConserStone 2011 - Conservation of Stone Heritage, Orléans, France.
    Scientific congresses and symposiums/Paper published in a journal
    • Idrissi, B., El Kihel, B., & Delaunois, F. (2011). "La contribution du facteur humain dans la prise de décision au sein du système de la gestion de maintenance" [Paper presentation]. CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco.
    • louhib, S., El Kihel, B., & Delaunois, F. (2011). "Modélisation des structures soumises au séisme" [Paper presentation]. CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco.
    • Mdehheb, Z., El Kihel, B., Lahsini, M., Bouamama, R., & Delaunois, F. (2011). "Impact de l'implantation du système de management environnemental sur les performances économiques de l'entreprise" [Paper presentation]. CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco.
    • Benbouaza, A., El Kihel, B., & Delaunois, F. (2011). "Diagnostic des défauts des roulements par analyse vibratoire" [Paper presentation]. CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco.
    • Delaunois, F., Sinnaeve, M., Breyer, J.-P., & Vitry, V. (2011). "Effects of Ti, V and Nb carbide on the properties of ICDP cast iron finishing rolls" [Paper presentation]. Abrasion 2011, Liège, Belgium.
    • Vitry, V., Kanta, A. F., & Delaunois, F. (2011). "Mechanical and wear characterization of electroless nickel-boron coatings" [Paper presentation]. ICMCTF 2011, San Diego, United States - California.
    Scientific congresses and symposiums/Poster
    • Sens, A., Kanta, A. F., Vitry, V., & Delaunois, F. (13 September 2011). "Corrosion resistance of electroless Ni-B coatings in sodium chloride, and alkaline and acid media" [Poster presentation]. Euromat 2011, Montpellier, France.
    Diverse speeches and writings/Other
    • Delaunois, F. (2011). "RTL/TVI : journal parlé de 13h et de 19h : Fin de la phase à chaud à ArcelorMittal Liège".
    Top
    2010
    Scientific journals/Article
    • Vitry, V., Kanta, A. F., & Delaunois, F. (15 December 2010). Initiation and formation of electroless nickel-boron coatings on mild steel: effect of substrate roughness. "Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 175", 266-273.
    • Vitry, V., Kanta, A. F., & Delaunois, F. (01 October 2010). Influence of local composition on morphology of electroless nickel-boron deposits on mild steel. "Praktische Metallographie, 42", 315-320.
    • Kanta, A. F., Poelman, M., Vitry, V., & Delaunois, F. (27 August 2010). Nickel-boron electrochemical properties investigations. "Journal of Alloys and Compounds, 505 (1)" (27), 151-156.
    • Kanta, A. F., Vitry, V., & Delaunois, F. (01 January 2010). Wear and Corrosion Resistance of Electroless Nickel-Boron Coated Mild Steel. "Materials Science Forum, 638-642", 846-851. doi:10.4028/www.scientific.net/MSF.638-642.846
    Scientific congresses and symposiums/Paper published in a journal
    • Kanta, A. F., Vitry, V., & Delaunois, F. (2010). "Effect of wear and heat treatments on the corrosion resistance of electroless nickel-boron coated mild steel" [Paper presentation]. Conference on Corrosion and Materials Protection, Prague, Czechia.
    • Delaunois, F., Quoirin, G., & Richeux, G. (2010). "Corrosion and Biocorrosion of Galvanized Steel Tubes Used in Water Distribution Systems" [Paper presentation]. Conference on Corrosion and Materials Protection, Prague, Czechia.
    Scientific congresses and symposiums/Poster
    • Sens, A., & Delaunois, F. (01 November 2010). "Inverse chill in cast iron" [Poster presentation]. Ecole doctorale MAIN, Mons, Belgium.
    Top
    2009
    Scientific journals/Article
    • Kanta, A. F., Vitry, V., & Delaunois, F. (31 December 2009). Effect of thermochemical and heat treatments on electroless nickel-boron. "Materials Letters, 63" (30), 2662-2665.
    • Kanta, A.-F., Vitry, V., & Delaunois, F. (03 November 2009). Wear and corrosion resistance behaviours of autocatalytic electroless plating. "Journal of Alloys and Compounds, 486" (1-2), 21-L23. doi:10.1016/j.jallcom.2009.07.038
    • Vitry, V., & Delaunois, F. (2009). How heat treatment can give better properties to electroless nickel-boron coatings. "Metallurgia Italiana", (Avril 2009), 49-54.
    Scientific congresses and symposiums/Poster
    • Vitry, V., Kanta, A. F., & Delaunois, F. (17 March 2009). "Initiation and formation of electroless nickel-boron deposits on steel" [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.
    Top
    2008
    Scientific journals/Article
    • Delaunois, F., & Guerlement, G. (2008). Etude de la corrosion de tuyaux en acier galvanisé utilisés en sanitaire. "VOM Info", 8-12.
    • Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. "Surface and Coatings Technology, 202" (14), 3316-3324.
    • Delaunois, F., & Guerlement, G. (2008). Study of the Corrosion of Galvanized Steel Tubes Used in Water Distribution Systems. "Chimie Nouvelle", (numéro spécial SRC-info 2008), 15-20.
    Scientific congresses and symposiums/Unpublished conference/Abstract
    • Vitry, V., & Delaunois, F. (01 September 2008). "How heat treatment can give better properties to electroless nickel-boron coatings" [Paper presentation]. Journée des doctorants de l'Ecole Doctorale, Liège, Belgium.
    • Vitry, V., & Delaunois, F. (26 February 2008). "Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments" [Paper presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.
    • Delaunois, F., De Longueville, T., & Marchal, Y. (26 February 2008). "Intergranular corrosion susceptibility of AlMg alloys exposed at medium temperatures" [Paper presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.
    Scientific congresses and symposiums/Paper published in a journal
    Top
    2007
    Scientific journals/Article
    Scientific congresses and symposiums/Paper published in a journal
    • Gobert, C., D'Alfonso, A., Delaunois, F., & Dumortier, C. (2007). "Evolution of ferrite content of continuously cast slabs of 2205 duplex stainless steel" [Paper presentation]. Duplex 2007, Grado, Italy.
    • Lecomte-Beckers, J., Delaunois, F., Breyer, J.-P., & Tchoufang Tchuindjang, J. (2007). "Metallurgical assessment of two HSS rolls grades for Hot Strip Mill" [Paper presentation]. AISTech 2007 Conference, Indianapolis, United States - Indiana.
    Top
    2006
    Scientific journals/Article
    • Vitry, V., & Delaunois, F. (02 May 2006). Study of hardness and mechanical properties of electroless nickel-boron coatings on various substrates after thermochemical treatment. "Algerian Journal of Advanced Materials, 3", 111-115.
    Scientific congresses and symposiums/Paper published in a journal
    • Gobert, C., D'Alfonso, A., Delaunois, F., & Dumortier, C. (2006). "Oxydation à haute température des aciers inxoydables. Effet de l'état de surface sur le comportement à l'oxydation" [Paper presentation]. Matériaux 2006, Dijon, France.
    • Vitry, V., & Delaunois, F. (2006). "Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment" [Paper presentation]. Sur/fin 2006, Milwaukee, United States.
    • Vitry, V., & Delaunois, F. (2006). "Nitridation treatments to improve the hardness and mechanical properties of electroless nickel-boron deposits" [Paper presentation]. IFHTSE 15 and SMT20 (International Federation of Heat Treating and Surface Finishing 15 and Surface Modification Treatments 20 Congress), Vienne, Austria.
    Top
    2005
    Books/Book published as author, translator, etc.
    • Dumortier, C., Riquier, Y., Lehert, P., Delaunois, F., & D'Alfonso, A. (2005). "Elaboration des métaux : Bases théoriques, exercices et applications informatiques". Editions ACCO LEUVEN.
    Scientific congresses and symposiums/Paper published in a journal
    • Dumortier, C., D'Alfonso, A., & Delaunois, F. (2005). "Characterisation and control of mould fluxes used for the continuous casting of steel" [Paper presentation]. 15th IAS Steelmaking Conferences, San Nicolas, Argentina.
    Top
    2004
    Scientific journals/Article
    • Delaunois, F. (01 January 2004). Influence de la découpe laser CO2 sur les alliages d'aluminium utilisés en aéronautique: 2ème partie. "ATB Métallurgie, 44" (1-2), 23-31.
    • Delaunois, F. (01 January 2004). Influence de la découpe laser CO2 sur les alliages d'aluminium utilisés en aéronautique: 1ère partie. "ATB Métallurgie, 44" (1-2), 18-22.
    Top
    2003
    Scientific congresses and symposiums/Paper published in a journal
    • Delaunois, F., Liénard, P., & Petitjean, J.-P. (2003). "Autocatalytic electroless nickel-boron plating on aluminium alloys" [Paper presentation]. Aluminium Two Thousand 5th World Congress, Rome, Italy.
    Top
    2002
    Scientific journals/Article
    Dissertations and theses/Doctoral thesis
    • Delaunois, F. (2002). "Les dépôts chimiques de nickel-bore sur alliages d'aluminium" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/25268
    Top
    2001
    Scientific congresses and symposiums/Paper published in a journal
    • Delaunois, F. (2001). "Les dépôts chimiques auto-catalytiques de nickel-bore sur alliages d'aluminium" [Paper presentation]. Les nickels chimiques, revêtements anticorrosion et anti-usure, Gosselies, Belgium.
    • Delaunois, F. (2001). "Autocatalytic electroless nockel-boron plaing on light alloys" [Paper presentation]. PhD Student's Day - VITO, .
    Top
    2000
    Scientific journals/Article
    Top
    1999
    Scientific journals/Article
    • Delaunois, F. (01 January 1999). Importance des dépôts chimiques autocatalytiques de nickel-bore. "ATB Métallurgie, 39" (1-2), 27-34.
    Top
    1997
    Scientific journals/Article
    Scientific congresses and symposiums/Paper published in a journal
    • Delaunois, F., Poulain, V., & Petitjean, J.-P. (1997). "A pretreatment against localized and filiform corrosion applied to aluminium alloys : the trivalent chromium pretreatment" [Paper presentation]. International Symposium on Aluminium Surface Science and Technology, Anvers, Belgium.
    Top
    1996
    Scientific congresses and symposiums/Paper published in a journal
    • Delaunois, F., Poulain, V., & Petitjean, J.-P. (1996). "The trivalent chromium pretreatment applied to aluminium alloys" [Paper presentation]. EUROCORR 1996, Nice, France.
    • Delaunois, F., Poulain, V., & Petitjean, J.-P. (1996). "The trivalent chromium pretreatment applied to aluminium 1050" [Paper presentation]. 5th International Conference on Aluminium Alloys ICAA5, Grenoble, France.
    Top