Publications
Edouard RIVIERE LORPHEVRE
Open the Institutional Repository
Number of publications : 270
2024
Scientific journals/Article
  • Leroy, C., Lavernhe, S., & Rivière, E. (24 August 2024). Hermite Quartic Splines for Smoothing and Sampling a Roughing Curvilinear Spiral Toolpath. "Applied Sciences, 14" (17), 7492. doi:10.3390/app14177492
  • Spitaels, L., Dambly, V., Otaegi, A., Bossu, J., Delmotte, C., Martic, G., Juste, E., Carrus, R., Arrazola, P.-J., Petit, F., Rivière, E., & Ducobu, F. (2024). Hybrid Fabrication of Zirconia Parts with Smooth Surface Texture and Tight Tolerances. "Journal of Composites Science". doi:10.3390/jcs8070233
  • SPITAELS, L., Nieto Fuentes, E., DAMBLY, V., Rivière, E., Arrazola, P.-J., & DUCOBU, F. (16 May 2024). Faster Evaluation of Dimensional Machine Performance in Additive Manufacturing by Using COMPAQT Parts. "Journal of Manufacturing and Materials Processing, 8" (3), 100. doi:10.3390/jmmp8030100
  • Ducobu, F., Kugalur-Palanisamy, N., Briffoteaux, G., Gobert, M., Tuyttens, D., Arrazola, P.-J., & Rivière, E. (16 April 2024). Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining—Application to Arbitrary Lagrangian Eulerian Orthogonal Cutting of Ti6Al4V. "Journal of Manufacturing Science and Engineering, 146" (6). doi:10.1115/1.4065223
  • Spitaels, L., Nieto Fuentes, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (February 2024). A Systematic Method for Assessing the Machine Performance of Material Extrusion Printers. "Journal of Manufacturing and Materials Processing, 8" (1), 36. doi:10.3390/jmmp8010036
  • Spitaels, L., Naiara Aldeiturriaga Olabarri, Bossu, J., Martic, G., Juste, E., Arrazola, P.-J., Rivière, E., & Ducobu, F. (2024). Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM. "Procedia CIRP, 121", 97-102. doi:10.1016/j.procir.2023.09.235
Scientific congresses and symposiums/Paper published in a journal
  • Spitaels, L., Aldeiturriaga Olabarri, N., Bossu, J., Martic, G., Juste, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (2024). Experimental evaluation of the maximal force before debonding a part from the build platform of an AM printer. "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-10
  • Bossu, J., Rivière, E., Spitaels, L., Ducobu, F., Delaunois, F., Martic, G., Delmotte, C., Juste, E., & Petit, F. (2024). Green machining of Ti6Al4V/Polymers composite made by pellets additive manufacturing. "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-210
  • Lorenzoni, M., Odent, J., Rivière, E., Spitaels, L., Homrani, M. K., & Ducobu, F. (2024). Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM). "Materials Research Proceedings, Vol. 41". doi:10.21741/9781644903131-11
Scientific congresses and symposiums/Poster
  • Spitaels, L., Rivière, E., Bossu, J., Dambly, V., & Ducobu, F. (2024). "Toward More Flexible and Personalized Production of Ceramic Parts" [Poster presentation]. Tuesday of Researchers "Mardi des Chercheurs" 2024, Mons, Belgium.
Scientific conferences in universities or research centers/Scientific conference in universities or research centers
  • Bossu, J., Rivière, E., Spitaels, L., Delaunois, F., Ducobu, F., Delmotte Cathy, & Martic Grégory. (20 March 2024). "Composite Ti-6Al-4V/Polymers Pellets Additive Manufacturing: improvement of the printing parameters to obtain dense and defectless part" [Paper presentation]. Metal AMS, Senlis, France.
Top
2023
Scientific journals/Article
  • Ducobu, F., Demarbaix, A., Rivière, E., Spitaels, L., Petit, F., Preux, N., Duterte, C., Mulliez, M., & Lauwers, B. (20 June 2023). Impact of Green Ceramic Hybrid Machining (GCHM) on Reliability and Repeatability of the Properties of Sintered Yttrium-Tetragonal Zirconia Polycrystal Parts. "Journal of Manufacturing and Materials Processing, 7" (3), 118. doi:10.3390/jmmp7030118
  • Ducobu, F., Palanisamy, N. K., Arrazola, P.-J., & Rivière, E. (03 May 2023). Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model. "Procedia CIRP, 117", 311-316. doi:10.1016/j.procir.2023.03.053
  • Spitaels, L., Rivière, E., Gregory Martic, Enrique Juste, & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography. "Materials Research Proceedings, 28", 1245-1253. doi:10.21741/9781644902479-135
  • Dambly, V., Rivière, E., Ducobu, F., & Verlinden, O. (2023). Tri-dexel-based cutter-workpiece engagement: computation and validation for virtual machining operations. "International Journal of Advanced Manufacturing Technology". doi:10.1007/s00170-023-10950-z
  • Spitaels, L., Dantinne, H., Bossu, J., Rivière, E., & Ducobu, F. (10 March 2023). A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. "Journal of Composites Science, 7" (3), 112. doi:10.3390/jcs7030112
  • Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (2023). Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing. "Procedia CIRP, 117", 456-461. doi:10.1016/j.procir.2023.03.077
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Fabrice Petit, Cathy Delmotte, Grégory Martic, Enrique Juste, Spitaels, L., Rivière, E., Ducobu, F., Bossu, J., & Delaunois, F. (29 September 2023). "Evaluation of the suitability of Pellet Additive Manufacturing technology for the design & manufacturing of complex ceramic parts" [Paper presentation]. IWAC (INTERNATIONAL WORKSHOP ON ADVANCED CERAMICS, IWAC09), Limoges, France.
  • Ducobu, F., Spitaels, L., Martic, G., Juste, E., & Rivière, E. (25 August 2023). "Hybrid manufacturing of components made of engineering ceramics" [Paper presentation]. 72nd CIRP General Assembly - STC-C meeting.
  • Ducobu, F., Kugalur Palanisamy, N., Arrazola, P.-J., & Rivière, E. (01 June 2023). "Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model" [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
  • Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (01 June 2023). "Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing" [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
  • Spitaels, L., Rivière, E., Martic, G., Juste, E., & Ducobu, F. (19 April 2023). "Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography" [Paper presentation]. 26th International ESAFORM Conference on Material Forming, ESAFORM 2023.
Scientific congresses and symposiums/Paper published in a journal
  • Dambly, V., Rivière, E., & Verlinden, O. (31 May 2023). Coupled Dynamic Simulator with Tri-Dexel Milling Module for Robotic Machining Operations. "Procedia CIRP, 117", 175 - 180. doi:10.1016/j.procir.2023.03.031
Reports/Other
  • Dehombreux, P., Rivière, E., Equeter, L., Verlinden, O., & Olivier, B. (2023). "Time2Go4.0 - Collaborative Projects for Top Indstrial Managers in Sustainable Industry 4.0 - How to ensure quality of preparation and execution of collaborative blended design projects including 4.0 and sustainability aspects?"
Top
2022
Scientific journals/Article
  • KUGALUR PALANISAMY, N., RIVIERE LORPHEVRE, E., Gobert, M., Briffoteaux, G., Tuyttens, D., Arrazola, P.-J., & DUCOBU, F. (06 June 2022). Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V. "Metals, 12" (6), 976. doi:10.3390/met12060976
  • Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (01 June 2022). Surface finishing of EBM parts by (electro-)chemical etching. "Procedia CIRP, 108", 112-117. doi:10.1016/j.procir.2022.03.023
  • Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (2022). Dimensional and geometrical performance assessment of two FDM printers using a benchmark artifact. "Proceedings of the European Society for Precision Engineering and Nanotechnology - 22nd International Conference and Exhibition", 69-72.
  • Beuscart, T., Arrazola, P.-J., Rivière, E., Flores, P., & Ducobu, F. (May 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling. "Procedia CIRP, 108", 436-441. doi:10.1016/j.procir.2022.03.068
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V. "Key Engineering Materials, 926", 1619-1628. doi:10.4028/p-be47dp
  • Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (17 March 2022). Adaptive benchmarking design for additive manufacturing processes. "Measurement Science and Technology, 33" (064003). doi:10.1088/1361-6501/ac5877
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (09 June 2022). "Surface finishing of EBM parts by (electro-)chemical etching" [Paper presentation]. 6th CIRP Conference on Surface Integrity.
  • Beuscart, T., Rivière, E., Ducobu, F., & Arrazola, P.-J. (08 June 2022). "Hole quality analysis of AISI 304-GFRP stacks using robotic drilling" [Paper presentation]. 6th CIRP Conference on Surface Integrity.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). "Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V" [Paper presentation]. 25th International Conference on Material Forming, ESAFORM 2022.
Scientific congresses and symposiums/Paper published in a journal
  • Dambly, V., Rivière, E., & Verlinden, O. (June 2022). Tri-Dexel Based Cutter-Workpiece Engagement Determination For Robotic Machining Simulator. "Procedia CIRP, 107", 1059 - 1064. doi:10.1016/j.procir.2022.05.108
Scientific congresses and symposiums/Poster
  • Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). "Pellets Additive Manufacturing of dense Tosoh black zirconia parts" [Poster presentation]. Conférence internationale Matériaux 2022, Lille, France.
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). "Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM)" [Poster presentation]. Mardi des chercheurs, Mons, Belgium.
  • Spitaels, L., Rivière, E., Bossu, J., & Ducobu, F. (September 2022). "Hybrid Manufacturing of Complex Ceramic Parts with Tight Tolerances and Smooth Surface Topography" [Poster presentation]. Mardi des Chercheurs - onzième éditions (2022), Mons, Belgium.
  • Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (01 June 2022). "Performances assessment of two FDM printers using a benchmark artifact" [Poster presentation]. euspen's 22 nd International Conference & Exhibition.
Dissertations and theses/Doctoral thesis
  • Gonze, N. (2022). "Understanding of rock cutting mechanism under confinement" [Doctoral thesis, UMONS - Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/44534
Scientific conferences in universities or research centers/Scientific conference in universities or research centers
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). "HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM" [Paper presentation]. Conférence méca, Mons, Belgium.
  • Leroy, C., Lavernhe, S., & Rivière, E. (21 October 2022). "Lissage et rééchantillonnage de trajectoires curvilinéaires par splines d'Hermite" [Paper presentation]. Manufacturing 21, Gif-sur-Yvette (Paris), France.
Top
2021
Scientific journals/Article
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (06 September 2021). Binder influence on green ceramic machining by means of milling and laser machining. "Procedia CIRP, 101", 206-209. doi:10.1016/j.procir.2021.02.023
  • Demarbaix, A., Mulliez, M., Rivière, E., Spitaels, L., Dutertre, C., Preux, N., Petit, F., & Ducobu, F. (2021). Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling. "Journal of Composites Science".
  • Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. "Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology", 99-102.
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (29 May 2021). Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses. "Journal of Manufacturing and Materials Processing, 5".
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. "International Journal of Material Forming, 4" (3), 361 - 374. doi:10.1007/s12289-020-01535-2
  • Beuscart, T., Arrazola, P., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque. "24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 2373". doi:10.25518/esaform21.2373
  • Demarbaix, A., Ducobu, F., Juste, E., Petit, F., DUTERTE, C., & Rivière, E. (01 January 2021). Experimental investigation on green ceramic machining with nanosecond laser source. "Journal of Manufacturing Processes, 61", 245-253. doi:10.1016/j.jmapro.2020.11.031
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (24 May 2021). "Binder influence on green ceramic machining by means of milling and laser machining" [Paper presentation]. 9th CIRP Conference on High Performance Cutting, HPC 2020.
  • Beuscart, T., Arrazola, P.-J., Rivière, E., & Ducobu, F. (14 April 2021). "Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque" [Paper presentation]. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021.
Scientific congresses and symposiums/Paper published in a book
  • Rivière, E., Broz Lofetigo, A., Dehombreux, P., Dvorak, J., Equeter, L., Hosnedl, S., Marketa, K., Lazaroi Lechuga, E., Lindell, M., Lindgern, P., Nemec, L., Neuvonen, T., Olivier, B., Ranalli, M., Varhelahti, M., Varona Alabern, M., Verlinden, O., & Cepickova, J. (2021). MUPIC: MULTIDISCIPLINARY PROJECT IN AN INTERNATIONAL CONTEXT. In Hans-Ulrich Heiss (Ed.), "Proceedings of SEFI 49th Annual Conference Blended Learning in Engineering Education: challenging, enlightening – and lasting?"Berlin, Unknown/unspecified: Technische universitat Berlin.
Scientific congresses and symposiums/Paper published in a journal
  • Dambly, V., Huynh, H. N., Verlinden, O., & Rivière, E. (2021). Coupled multibody model of industrial robot with milling simulator for trajectory compensation. "ECCOMAS Multibody Dynamics Conference Proceedings". doi:10.3311/ECCOMASMBD2021-139
  • Dambly, V., Huynh, H. N., Rivière, E., & Verlinden, O. (2021). Development of tri-dexel based cutting simulator for cutter-workpiece engagement and cutting forces determination. "Procedia euspen".
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (2021). "Influences of cutting speed and material constitutive models on chip formation and their effects on the results of Ti6Al4V orthogonal cutting simulation" [Paper presentation]. ESAFORM 2021, Liège, Belgium.
Scientific congresses and symposiums/Poster
  • Spitaels, L., Rivière, E., Anthonin, D., & Ducobu, F. (June 2021). "Development of a novel benchmark artifact for Additive Manufacturing processes" [Poster presentation]. euspen’s 21st International Conference & Exhibition.
  • Dambly, V., Verlinden, O., & Rivière, E. (20 March 2021). "Robotic Milling: Development of 3D milling forces computation module for tool trajectories adaptation" [Poster presentation]. Mardi des chercheurs, Valenciennes, France.
  • Beuscart, T., Ducobu, F., & Rivière, E. (2021). "Etude de l'usinage robotique de stacks métaux-composites" [Poster presentation]. Mardi des chercheurs 2021, Valenciennes, France.
Top
2020
Scientific journals/Article
  • Huynh, H. N., Assadi, H., Dambly, V., Rivière, E., & Verlinden, O. (30 September 2020). Direct method for updating flexible multibody systems applied to a milling robot. "Robotics and Computer-Integrated Manufacturing, 68", 102049. doi:10.1016/j.rcim.2020.102049
  • Zhao, L., Santos Macias, J. G., Dolimont, A., Simar, A., & Rivière, E. (12 August 2020). Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. "Additive Manufacturing, 36", 101499. doi:10.1016/j.addma.2020.101499
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic. "Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology".
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (21 May 2020). Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior. "Journal of Manufacturing and Materials Processing, 4" (50). doi:10.3390/jmmp4020050
  • Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (27 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts. "Procedia Manufacturing, 47", 1036-1042. doi:10.1016/j.promfg.2020.04.321
  • Kugalur Palanisamy, N., Rivière, E., Ducobu, F., & Arrazola, P. (27 April 2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. "Procedia Manufacturing, 47", 458-465. doi:10.1016/j.promfg.2020.04.335
  • Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic. "CIRP Annals - Manufacturing Technology". doi:10.1016/j.cirp.2020.04.051
  • Equeter, L., Ducobu, F., Rivière, E., Serra, R., & Dehombreux, P. (27 March 2020). An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools. "Journal of Manufacturing and Materials Processing, 4" (27), 1-13. doi:10.3390/jmmp4010027
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (15 August 2020). "Prediction of local sintering in laser beam machining of green Y-TZP ceramic" [Paper presentation]. 69th CIRP General Assembly, Munich, Germany.
  • Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (04 April 2020). "Influence of conventional machining on chemical finishing of Ti6Al4V electron beam melting parts" [Paper presentation]. 23rd International Conference on Material Forming, ESAFORM 2020.
Scientific congresses and symposiums/Paper published in a journal
  • Kugalur Palanisamy, N., Ducobu, F., Rivière, E., & Arrazola, P. (2020). "Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation" [Paper presentation]. Esaform 2020, Cottbus , Germany.
Scientific congresses and symposiums/Poster
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (08 June 2020). "A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic" [Poster presentation]. 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020.
Dissertations and theses/Doctoral thesis
  • Equeter, L. (2020). "Optimal Replacement of Cutting Tools through Degradation Monitoring Techniques and Residual Lifetime Prediction Models" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/14715doi:10.13140/RG.2.2.23962.06080
  • Demarbaix, A. (2020). "Characterization of Green Ceramic Machining (GCM) by means of milling and laser in order to develop a new manufacturing chain for ceramic (MACHCERAM)" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/29767
Top
2019
Scientific journals/Article
  • Dutoit, C., Dehombreux, P., Rivière, E., & Equeter, L. (2019). Statistical Process Control and Maintenance Policies for Continuous Production Systems Subjected to Different Failure Impact Models: Literature Review. "Procedia CIRP". doi:10.1016/j.procir.2020.01.050
  • Huynh, H., Assadi, H., Rivière, E., Verlinden, O., & Ahmadi, K. (17 September 2019). Modelling the dynamics of industrial robots for milling operations. "Robotics and Computer-Integrated Manufacturing, 61". doi:10.1016/j.rcim.2019.101852
  • Rivière, E., Huynh, H., Ducobu, F., & Verlinden, O. (08 July 2019). Cutting Force Prediction in Robotic Machining. "Procedia CIRP, 82", 509-514. doi:10.1016/j.procir.2019.04.143
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (02 July 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112611
  • Kugalur Palanisamy, N., Rivière, E., Pedro, A., & Ducobu, F. (02 July 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112617
  • Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (02 July 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts. "AIP Conference Proceedings, 2113" (150020). doi:10.1063/1.5112696
  • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112609
  • Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (13 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. "Procedia CIRP, 82", 142-147. doi:10.1016/j.procir.2019.04.071
  • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. "European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019", 76-77.
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (11 July 2019). "Développement d'une platforme hybride pour la mise en forme de la céramique" [Paper presentation]. Manufacturing 21, Mons, Belgium.
  • Rivière, E., Huynh, H. N., Verlinden, O., & Ducobu, F. (13 June 2019). "Cutting force prediction in robotic machining" [Paper presentation]. 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.
  • Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (01 June 2019). "Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3" [Paper presentation]. 17th CIRP conference on modelling of machining operations, Sheffield, Unknown/unspecified.
  • Dolimont, A., Santos Macias, J. G., Lv, Z., Simar, A., & Rivière, E. (29 May 2019). "Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM)" [Paper presentation]. 4th Workshop in AM, Leuven, Belgium.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (08 May 2019). "Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process" [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). "Performance simulation of different toolpaths in 2D1/2 pocket milling" [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (01 May 2019). "Chemical etching as a finishing process for electron beam melting (EBM) parts" [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (01 May 2019). "Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism" [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.
  • Ducobu, F., & Rivière, E. (21 February 2019). "Transition of the finite element modelling of orthogonal cutting (2D) to oblique cutting (3D)" [Paper presentation]. CIRP Winter Meetings, Paris, France.
  • Leroy, C., Rivière, E., & Ducobu, F. (14 January 2019). "Evaluation de l'efficacité temporelle de trajectoires en fraisage à l'aide de VPOp" [Paper presentation]. Manufacturing 21, Toulon, France.
Scientific congresses and symposiums/Poster
  • Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). "An Integrative Approach for Estimating Cutting Tools Wear in Turning" [Poster presentation]. MS&T2019, Portland, United States - Oregon.
  • Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). "Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining" [Poster presentation]. 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019.
  • Demarbaix, A., Rivière, E., Ducobu, F., & Petit, F. (03 April 2019). "Hybrid platform: sequential combination of two technologies in shaping of ceramic materials" [Poster presentation]. young Ceramists Additive Manufacturing Forum (yCAM), Mons, Belgium.
  • Huynh, H., Rivière, E., & Verlinden, O. (05 March 2019). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
  • Leroy, C., Rivière, E., & Ducobu, F. (05 March 2019). "Evaluation de l'efficacité temporelle de trajectoires d'évidement 2D1/2" [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
Dissertations and theses/Doctoral thesis
  • Huynh, H. (2019). "Robotic machining: Development and validation of a numerical model of robotic milling to optimise the cutting parameters" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/35838
Diverse speeches and writings/Article for a general audience
  • Demarbaix, A., Rivière, E., & Dehombreux, P. (2019). UMONS: Plongée en sous-marin. "journal sudinfo".
Diverse speeches and writings/Other
  • Rivière, E. (2019). "Journal télévisé RTBF: Coupe d'europe de robotique".
  • Rivière, E. (2019). "Télé MB: Les Atom-X se préparent pour la coupe de robotique".
Top
2018
Scientific journals/Article
  • Verlinden, O., Huynh, H., Kouroussis, G., & Rivière, E. (01 December 2018). Modelling of flexible bodies with minimal coordinates by means of the corotational formulation. "Multibody System Dynamics, 42" (4), 495-514. doi:10.1007/s11044-017-9609-0
  • Dutoit, C., Dehombreux, P., & Rivière, E. (2018). Using quality control in optimizing opportunistic maintenance. "IFAC Proceedings Volumes".
  • Huynh, H., Rivière, E., Ducobu, F., Ozcan, A., & Verlinden, O. (30 June 2018). Dystamill: a framework dedicated to the dynamic simulation of milling operations for stability assessment. "International Journal of Advanced Manufacturing Technology, 98", 2109-2126. doi:10.1007/s00170-018-2357-3
  • Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (02 May 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts. "AIP Conference Proceedings, 1960" (140007). doi:10.1063/1.5034999
  • Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the Influence of Tool Wear on Force Signals: a Finite Element Approach in AISI 1045 Orthogonal Cutting. "AIP Conference Proceedings, 1960" (070012). doi:10.1063/1.5034908
  • Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate. "AIP Conference Proceedings, 1960" (070020). doi:10.1063/1.5034916
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology. "AIP Conference Proceedings, 1960" (070005). doi:10.1063/1.5034901
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. "Journal of Manufacturing Processes, 32", 85-92. doi:10.1016/j.jmapro.2018.01.020
  • Rivière, E., Huynh, H., & Verlinden, O. (11 January 2018). Influence of the time step selection on dynamic simulation of milling operation. "International Journal of Advanced Manufacturing Technology, 95" (9-12), 4497-4512. doi:10.1007/s00170-017-1570-9
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). "Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance?" [Paper presentation]. Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.
  • Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). "Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). "Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). "Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Benhassine, M., Rivière, E., Arrazola, P.-J., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). "2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology" [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
Scientific congresses and symposiums/Paper published in a journal
  • Huynh, H., Kouroussis, G., Verlinden, O., & Rivière, E. (2018). "Modal updating of a 6-axis robot for milling application" [Paper presentation]. Proceedings of the 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan.
  • Huynh, H., Rivière, E., & Verlinden, O. (2018). "Multibody modelling of a flexible 6-axis robot dedicated to robotic machining" [Paper presentation]. The 5th Joint International Conference on Multibody System Dynamics, Lisbonne, Portugal.
Scientific congresses and symposiums/Poster
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). "Hybrid machining of Ceramic: Combination sequential milling and laser machining" [Poster presentation]. The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). "Manumons" [Poster presentation]. 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France.
Dissertations and theses/Doctoral thesis
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). "Functionalization of Electron BeamMelting parts in order to guide finishing operations" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478
Diverse speeches and writings/Article for a general audience
  • Lust, A., Steinfort, C., Rivière, E., & Ducobu, F. (01 May 2018). Engineers around the world - My experience abroad. "Polytech.News, 56".
Top
2017
Scientific journals/Article
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. "AIP Conference Proceedings, 1896". doi:10.1063/1.5008036
  • Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. "Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017", 226-234.
  • Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. "Procedia CIRP, 58", 245-250. doi:10.1016/j.procir.2017.03.188
  • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. "Procedia CIRP, 58", 239-244. doi:10.1016/j.procir.2017.03.187
  • De Formanoir, C., Brulard, A., Vivès, S., Guilhem, M., Prima, F., Michotte, S., Rivière, E., Dolimont, A., & Godet, S. (04 June 2017). A strategy to improve the work-hardening behavior of Ti-6Al-4V parts produced by additive manufacturing. "Materials Research Letters, 5" (4), 201-208. doi:10.1080/21663831.2016.1245681
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. "European Journal of Mechanics. A, Solids, 65", 324-335. doi:10.1016/j.euromechsol.2017.05.007
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. "Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017", 111-112.
  • Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. "Finite Elements in Analysis and Design, 134", 27-40. doi:10.1016/j.finel.2017.05.010
  • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. "Meccanica, 52", 1577-1592. doi:10.1007/s11012-016-0499-7
  • Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. "International Journal of Mechanical Sciences, 122", 143-155. doi:10.1016/j.ijmecsci.2017.01.004
  • Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. "Meccanica, 52" (1-2), 35-44. doi:10.1007/s11012-016-0398-y
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). "REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL" [Paper presentation]. XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.
  • Huynh, H., Rivière, E., & Verlinden, O. (09 August 2017). "Report of robotic machining measurements using a Stäubli TX200 robot: application to milling" [Paper presentation]. ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE2017), Cleveland, United States - Ohio.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). "Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters" [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
  • Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs" [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.
  • Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). "The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation" [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). "Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters" [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.
Scientific congresses and symposiums/Paper published in a journal
  • Huynh, H., Verlinden, O., & Rivière, E. (2017). "Robotic Machining Simulation using a Simplified Multibody Model" [Paper presentation]. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar, Croatia.
Scientific congresses and symposiums/Poster
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). "Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life" [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size" [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs" [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). "The Hybrid Machining of Ceramic The choice of production stage" [Poster presentation]. euspen's 17th International Conference & Exhibition, Hanovre, Germany.
  • Huynh, H., Rivière, E., & Verlinden, O. (07 March 2017). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). "Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). "Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Leroy, C., Wattiaux, D., Dolimont, A., & Rivière, E. (07 March 2017). "L'impression 3D comme outil d'aide dans un cours de géométrie" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). "Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). "Influence of process parameters on surface roughness of EBM" [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "The Hybrid Machining of Ceramic: The choice of production stage" [Poster presentation]. 8e édition montoise du MdC2017, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size" [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.
Diverse speeches and writings/Article for a general audience
  • Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. "Polytech.News, 55".
Top
2016
Scientific journals/Article
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. "AIP Conference Proceedings, 1769". doi:10.1063/1.4963616
  • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. "European Journal of Mechanics. A, Solids, 59", 58-66. doi:10.1016/j.euromechsol.2016.03.008
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. "Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing".
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. "Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016".
  • Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. "International Journal of Mechanical Sciences, 107", 136-149. doi:10.1016/j.ijmecsci.2016.01.008
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. "International Journal of Rapid Manufacturing, 5" (3/4).
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). "Study of the functionalization of electron beam melting part through machining" [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). "Characterization of electron beam melting process (EBM) : Capability approach" [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.
  • Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots" [Paper presentation]. MUGV 2016, Tours, France.
  • Verlinden, O., Huynh, H., & Rivière, E. (29 May 2016). "Modelling of flexible bodies with minimal coordinates by means of the co-rotational formulation" [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
  • Huynh, H., Rivière, E., & Verlinden, O. (29 May 2016). "Integration of machining simulation within a multibody framework: application to milling" [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). "Functionalization of Electron beam melting parts by Machining" [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.
  • Rivière, E., Huynh, H., & Verlinden, O. (17 May 2016). "Time step selection for the dynamic simulation of milling operations" [Paper presentation]. International conference on COmputational methods in Manufacturing Processes (ICOMP), Liège, Belgium.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). "Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining" [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.
Scientific congresses and symposiums/Paper published in a journal
  • Huynh, H., Rivière, E., & Verlinden, O. (15 September 2016). Milling Simulations with a 3-DOF Flexible Planar Robot. "International Journal of Industrial and Manufacturing Engineering, 10" (9), 1661-1670.
  • Wattiaux, D., Verlinden, O., Rivière, E., & Renotte, C. (2016). "Virtual and rapid prototyping to develop spatial visualization skills of students in engineering" [Paper presentation]. 44th Annual Conference of the European Society for Engineering Education (SEFI 2016), Tampere, Finland.
  • Leroy, C., Rivière, E., & Filippi, E. (2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots" [Paper presentation]. MUGV 2016, Tours, France.
  • Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). "Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche" [Paper presentation]. MUGV 2016, Tours, France.
Scientific congresses and symposiums/Poster
  • Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). "Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "CEL Modelling of Ti6Al4V Orthogonal Cutting" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining" [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). "Development of the hybrid sequential machining: Laser machining and milling" [Poster presentation]. 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
  • Huynh, H., Rivière, E., & Verlinden, O. (18 May 2016). "Robotic machining: Development & validation of a robotic machining numerical model in order to optimize the cutting parameters" [Poster presentation]. 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). "Concept of the hybrid machining: the laser machining and milling" [Poster presentation]. Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.
  • Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). "Study of the functionalization of electron beam melting part through machining" [Poster presentation]. Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France.
Diverse speeches and writings/Other
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser".
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière".
Top
2015
Scientific journals/Article
  • Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. "International Journal of Material Forming, 8" (3), 455-468. doi:10.1007/s12289-014-1189-4
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. "Procedia CIRP, 31", 124-129. doi:10.1016/j.procir.2015.03.056
  • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. "Key Engineering Materials, 651-653", 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. "Key Engineering Materials, 651-653", 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197
  • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. "Simulation Modelling Practice and Theory, 53", 1-14. doi:10.1016/j.simpat.2015.02.003
  • Letot, C., Dehombreux, P., Rivière, E., Fleurquin, G., & Lesage, A. (01 March 2015). A degradation model for maintenance improvement in respect of cost and availability. "Journal of Quality in Maintenance Engineering, 21" (1), 55 - 69. doi:10.1108/JQME-01-2013-0001
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). "L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage" [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). "Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining" [Paper presentation]. 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.
  • Ducobu, F., & Rivière, E. (26 May 2015). "On going topics in modelling of machining" [Paper presentation]. Les nouvelles tendances et techniques d'usinage pour le secteur aérospatial, Wavre, Belgium.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). "Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling" [Paper presentation]. Esaform 2015, Graz, Austria.
  • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). "Uncertainty management of cutting forces parameters and its effects on machining stability" [Paper presentation]. 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.
Scientific congresses and symposiums/Poster
  • Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). "Metrological analysis of electron beam melting process (EBM)" [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). "A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting" [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). "LAMAC: Usinage laser sur de la céramique « crue »" [Poster presentation]. The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). "Characterization of electron beam melting process (EBM) in order to enhance finishing operations" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). "A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting" [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). "Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). "Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot" [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Boulvain, J., VanParys, L., Rivière, E., Ducobu, F., & Legrain, H. (02 March 2015). "Improvement of underground investigation techniques: a soil model coupling Drucker-Prager & ALE" [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.
Learning materials/Course notes
  • Rivière, E. (2015). "Topographie : Notes de cours".
  • Rivière, E., Dolimont, A., Leroy, C., & Wattiaux, D. (2015). "Géométries et communication graphique - exercices".
Diverse speeches and writings/Other
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). "Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté".
Top
2014
Scientific journals/Article
  • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. "International Journal of Mechanical Sciences, 81", 77-87. doi:10.1016/j.ijmecsci.2014.02.017
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche" [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.
Scientific congresses and symposiums/Paper published in a journal
  • Leroy, C., Rivière, E., & Filippi, E. (2014). "TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE" [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). "TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE" [Paper presentation]. Eleventh International Conference on High Speed Machining, Prague, Czechia.
  • Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. "Proceedings of the eleventh international conference on high speed machining (HSM 2014)".
Scientific congresses and symposiums/Poster
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Modèle thermique par éléments finis de différentes trajectoires en usinage laser" [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). "Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model" [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine" [Poster presentation]. 1st Research Day of the Materials Research Institute, Mons, Belgium.
  • Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche" [Poster presentation]. Journée des chercheurs de l'Institut Matériaux, Mons, Belgium.
Dissertations and theses/Master’s dissertation
  • Boulvain, J. (2014). "A contribution to the simulation of soil testing" [Master’s dissertation, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/7420
Learning materials/Course notes
  • Rivière, E., Filippi, E., & Dehombreux, P. (2014). "Construction des machines et procédés de fabrication : Notes de cours".
Top
2013
Scientific journals/Article
  • Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. "Journal of Mechanics Engineering and Automation, 3", 441-448.
  • Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. "Procedia CIRP, 8", 378-383. doi:10.1016/j.procir.2013.06.120
  • Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. "Key Engineering Materials, 554-557", 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). "Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V" [Paper presentation]. CIRP Conference on Modeling of Machining Operations, Turin, Italy.
  • Rivière, E., & Filippi, E. (18 April 2013). "Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation" [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). "Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique" [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). "A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V" [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium.
Scientific congresses and symposiums/Poster
  • Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting" [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany.
  • Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). "Optimisation de l'usinage de cavités par fraisage" [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). "Finition des pièces mécaniques à la sortie d'une production additive" [Poster presentation]. 7ème édition de la Matinée de Chercheurs, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting" [Poster presentation]. Matinée des Chercheurs 2013, Mons, Belgium.
Dissertations and theses/Doctoral thesis
  • Letot, C. (2013). "Maintenance prévisionnelle d'équipements industriels basée sur la modélisation, l'estimation et la simulation de lois de dégradation" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23018
  • Ducobu, F. (2013). "Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/35573
Top
2012
Scientific journals/Article
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). "Chip Formation in Microcutting" [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). "Dynamic simulation of the micro-milling process including minimum chip thickness" [Paper presentation]. 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.
Scientific congresses and symposiums/Paper published in a journal
  • Ducobu, F., Rivière, E., & Filippi, E. (2012). "Chip Formation in Micro-cutting" [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
Diverse speeches and writings/Article for a general audience
  • Rivière, E., Brunée, N., & Losseau, M. (12 June 2012). La coopération au développement par la pratique. "Polytech.News, 47".
  • Avau, J., & Rivière, E. (12 June 2012). Education et solidarité: ingénieurs et citoyens, ils passent à l'action. "Polytech.News, 47".
Top
2011
Scientific journals/Article
  • Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. "Advanced Materials Research, 223", 3-11. doi:10.4028/www.scientific.net/AMR.223.3
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). "A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V" [Paper presentation]. CIRP conference on modelling of machining operations, Sintra, Portugal.
  • Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). "Experimental study of parameter-dependent analytical cutting force model" [Paper presentation]. Matinée des chercheurs, UMONS, Belgium.
Scientific congresses and symposiums/Paper published in a journal
Scientific congresses and symposiums/Poster
  • Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). "Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis" [Poster presentation]. 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
Diverse speeches and writings/Article for a general audience
  • Vanderstappen, X., & Rivière, E. (22 November 2011). Le projet Icare. "Polytech.News, 46".
  • Tam, E., El Hiki, L., Dumont, E., & Rivière, E. (10 June 2011). Pôles d'attraction internationale. "Polytech.News, 44".
  • Rivière, E. (15 March 2011). Sixième édition de la matinée des chercheurs. "Polytech.News, 45".
Top
2010
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting" [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.
  • Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). "Orthogonal Cutting Simulations with Abaqus/Explicit - Current results" [Paper presentation]. Simulia Academic Seminar 2010, Leuven, Belgium.
Scientific congresses and symposiums/Paper published in a journal
  • Ducobu, F., Rivière, E., & Filippi, E. (2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting" [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.
Scientific congresses and symposiums/Poster
  • Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). "Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis" [Poster presentation]. Matinée des Chercheurs, Bruxelles, Belgium.
Diverse speeches and writings/Article for a general audience
  • Rivière, E. (11 June 2010). Coopération au développement : itinéraire d'un chercheur congolais. "Polytech.News, 44".
  • Rivière, E. (10 March 2010). Notre identité au sein de l'UMONS : entretien avec Monsieur le Recteur Calogero Conti. "Polytech.News, 43".
Top
2009
Scientific journals/Article
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale" [Paper presentation]. 19ème Congrès Français de Mécanique, Marseille, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). "Investigations on chip formation in micro-milling" [Paper presentation]. International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation in Micromilling" [Paper presentation]. 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.
Scientific congresses and symposiums/Paper published in a journal
  • Fleurquin, G., Lesenne, J.-M., Dehombreux, P., & Rivière, E. (2009). "Optimisation de la maintenance de lignes continues de production" [Paper presentation]. PErformances et Nouvelles TechnolOgies en Maintenance, Autrans, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale" [Paper presentation]. Congrès Français de mécanique, Marseille, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip formation in micro-milling" [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Paper presentation]. CIRP conference on modelling of machining operations, San Sebastian, Spain.
Scientific congresses and symposiums/Poster
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Poster presentation]. 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.
  • Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). "Identification de modèles d'efforts de coupe en fraisage" [Poster presentation]. Lab' insight, Louvain-la-Neuve, Belgium.
  • Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling" [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.
Top
2008
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). "Phénomènes de coupe en micro-fraisage par enlèvement de copeaux" [Paper presentation]. Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.
Scientific congresses and symposiums/Paper published in a journal
Scientific congresses and symposiums/Poster
  • Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). "Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux" [Poster presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.
Top
2007
Scientific journals/Article
Scientific congresses and symposiums/Paper published in a journal
Scientific congresses and symposiums/Poster
  • Rivière, E. (13 March 2007). "Forces, vibrations and roughness prediction in milling using dynamic simulation" [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.
  • Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). "Etude et simulation des procédés d'usinage à grande vitesse" [Poster presentation]. Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.
Dissertations and theses/Doctoral thesis
  • Rivière, E. (2007). "Etude et simulation de procédés de fraisage grande vitesse : stabilité, efforts de coupe, états de surface" [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/34551
Top
2006
Scientific congresses and symposiums/Unpublished conference/Abstract
  • Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). "Forces, vibrations and roughness prediction in milling using dynamic simulation" [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
  • Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). "Chatter detection using a microphone" [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
Scientific congresses and symposiums/Paper published in a journal
Top